**hot tuning manifold**

[M20olly]

TRM-TUNING -
toecutter666 -
datourer -
m20olly - pm sent
Petrol_1 -

[petrol_1]

[quote="M20olly"]TRM-TUNING -
toecutter666 -
datourer -
m20olly - pm sent
Petrol_1 -e mail sent

[petrol_1]

Louise
@HOTUNING is now awaiting EVERY ONES EMAILS / paypal addys before we can proceed

[hongkongfuey]

[quote="M20olly"]TRM-TUNING -
toecutter666 -
datourer -
m20olly - pm sent
Petrol_1 -e mail sent
hongkongfuey - pm sent ( hope you don't mind me jumping in)

[toecutter666]

Done, just waiting by the post box like a kid on xmas morning

[hongkongfuey]

i've pm'd 'zimmer-320i' but it's still in my outbox , does anyone know how often he is on here

[petrol_1]

hongkongfuey
You can email Lousie direct at Hottung with your details and get it straight away

i got mine yesterday

THANKS LOUSIE

[hongkongfuey]

yeah did that, got mine 4 days to my door well done louise, left feedback well happy

[mhuk]

Hello,
Please put me down for one!!

How do I pay please?

Regards

Martin

[hongkongfuey]

hello martin, goto page one of this thread, on the hottuning responce click the pm or the e-mail at the bottom and ask for the manifold, they will need your paypal address, home address.

they will send a request invoice to your paypal you click on pay and wait for it to turn up

[stonesie]

Is this still going? i would be very interested in this combo

[hongkongfuey]

hello mate, goto page one of this thread, on the hottuning responce click the pm or the e-mail at the bottom and ask if the manifold + strut brace combo is still available,

if it is they will need your paypal address, home address.

they will send a request invoice to your paypal you click on pay and wait for it to turn up

[hongkongfuey]

i will be putting pics of mine up attatched to engine a bit later (engine swap section)

[hottuning_eu]

hi

At the moment the manifold is not in stock we will have that in about 2 months again, I will notify it at the zone when they're available agian


regards,

Louise

[Batesy8]

Is this list going to keep growing until they have them in stock? If so put my name down

[hottuning_eu]

It is possible to put your name done, as soon as we have stock we can directly send paypal invoices and send out the new manifolds

[mhuk]

martinholmes@hotmail.com

[mr_cool]

are these any good? people that bought them?

[gooner1]

Some of the people that have them, think so mr-cool.
Some of the people that have,nt don.t think so.
Me, i have one fitted and the car, 86 325i cab, feels much livelier, especially after 3000rpm.
Have also noted, that my fuel consumption is actually better now.
Will however qualify the above , as when i removed my centre and back box, i did find a hole
in one of the old twin pipes. With a newly fitted centre and back box now fitted, they could
well be the cause of the improvements. Heres a video clip of the sound, which incidentally,
i was going to post, in the aim of finding where the slight ticking noise is coming from.



http://s75.photobucket.com/albums/i298/ ... _A0040.flv

[toecutter666]

After seeing young gooner fitting his a while back i bought myself one and a full stainless system, sounds sweet, a nice deep rumble but not loud till you push the loonie pedal

[hongkongfuey]

a couple of pics of mine

[mr_cool]

quality, cheers lads! will put one of these on my shopping list then!

gooner, got any engine pics of yours? i like the black paint instead of the usual chrome!

hongkongfuey very brave with the orange theme but doesntlook out of the ordinary!! sweet!

[gooner1]

quality, cheers lads! will put one of these on my shopping list then!

gooner, got any engine pics of yours? i like the black paint instead of the usual chrome!



hongkongfuey very brave with the orange theme but doesntlook out of the ordinary!! sweet!

Oooh, an excuse to post pics.

[mr_cool]

nice!! what did you use to paint the rocker cover etc. and get all the bmw in white with the stripes? are those lines free hand??

[hongkongfuey]

i use plasi-cote you can get it from b&q ,

if you want it black spray it black and when it's dry get some sand paper/block and rub off the lines

[gooner1]

Make sure you sand the rocker cover first Mr Cool, then a coat of etch primer.
Then as HGF says top coat of your chosen paint, i used Harley Davidson VHT on the cover, and Hycote Crackle finish on the inlet manifold. Rub the lines down to a nice bright finish, and
a topcoat of clear laquer if you want. May be touching up an old rocker cover i done a while back, and then sticking it up for sale soon.

[timsands]

can i please put my name down for one?

[hottuning_eu]

Ok, news from the factory. I just got a new sample from our manufacter. It looks great. In 1 or 2 weeks I do get about 5 pieces in stock. And Januari we will have new stock and then more then enough again. We can make a great deal again then or a new GB!!

Keep you updated!

[timsands]

hottuning_eu please can you send me an email when they are back in?

timsands@hotmail.co.uk

thanksss

[hottuning_eu]

I let you know asap!

[Driftben]

can you get hold of a M30 manifold?

[hottuning_eu]

Another forum member is going to help us to produce 1 with us.

But that will take some time

[Si316]

Which engine is the 4 cyl manifold on the website for? m40 or m10? Is it designed for RHD cars?

[hottuning_eu]

yes m40 but not for RHD

[Sebastian35]

Correct me if i am wrong but I have seen this manifold on the bimmerforums.co.uk they were offering them for £180 including shipping. Can we as E30 zone members get the offer if there is enough interest?