Would anyone be interested in a braided clutch pipe GB

Enter a group buy or look here for zone discounts

Moderator: martauto

RobCallow
E30 Zone Newbie
E30 Zone Newbie
Posts: 239
Joined: Sat Nov 10, 2007 11:00 pm
Location: Deepest Darkest Norfolk

Post Fri Oct 24, 2008 2:19 pm

As above just gauging interest not even looked into prices/supplier yet.
325i Track Project.
Top
User avatar
lloydp
E30 Zone Newbie
E30 Zone Newbie
Posts: 99
Joined: Mon Oct 29, 2007 11:00 pm
Location: Fordham, Ely, Cambs

Post Mon Oct 27, 2008 10:18 pm

This is the flexible hose just before the slave cylinder, right? I wouldn't mind one provided it had stainless hardware and wasn't too expensive. Finding a replacement for the standard one was a right pain when it refused to come off the slave cylinder...all to do with that funny rigid bit of pipe on the end.
Top
Taylor325i
E30 Zone Camper
E30 Zone Camper
Posts: 1120
Joined: Sun Jan 30, 2005 11:00 pm
Location: Kilmarnock, Ayrshire, Scotland. Brilliant Red Tech II 325i.

Post Tue Nov 04, 2008 7:27 pm

I'd be interested in one depending on price.



Taylor.
Image
Top
shorty73
E30 Zone Regular
E30 Zone Regular
Posts: 383
Joined: Sat Jun 23, 2007 11:00 pm

Post Tue Nov 04, 2008 8:57 pm

It wouldn't cost you much to make up your own. 1 metre of hose and two fittings from somewhere like Rally Design. The price you'd pay for some one making some you'd save on doing it yourself.


Then again if you want to pay me to make up a load I'll do it!! :)
See us in www.racingsaloons.co.uk helped by,
alloyproducts for alloy fabrications
www.motorsportoils.co.uk for Lucas oil
www.zeroexhausts.co.uk for the noise
MTech 07831831846 for an engine!
Top
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Tue Nov 04, 2008 8:58 pm

it'll probably be less than a new one from the dealer, these cost about £80 at the dealers, shocking
Top
shorty73
E30 Zone Regular
E30 Zone Regular
Posts: 383
Joined: Sat Jun 23, 2007 11:00 pm

Post Tue Nov 04, 2008 9:12 pm

1 x female swivel connector £4.30
1 x male connector £3.30
1 x male to male adaptor £3.50
1m of hose £3.50

or pay a Stealer £80?

No contest.
See us in www.racingsaloons.co.uk helped by,
alloyproducts for alloy fabrications
www.motorsportoils.co.uk for Lucas oil
www.zeroexhausts.co.uk for the noise
MTech 07831831846 for an engine!
Top
Nay
Channel Island Crew
Channel Island Crew
Posts: 3988
Joined: Wed Aug 13, 2008 11:00 pm

Post Wed Nov 05, 2008 10:47 am

I would be.
Image

Uni is killing the project.
Top
RobCallow
E30 Zone Newbie
E30 Zone Newbie
Posts: 239
Joined: Sat Nov 10, 2007 11:00 pm
Location: Deepest Darkest Norfolk

Post Fri Nov 07, 2008 6:23 am

I don't think it is going to be worth setting up a GB

Many thanks for the info Shorty73 :D
325i Track Project.
Top
djs325
E30 Zone Newbie
E30 Zone Newbie
Posts: 248
Joined: Sat Jun 24, 2006 11:00 pm
Location: Melbourne, Australia

Post Tue Nov 18, 2008 11:58 pm

When I made mine out of Goodridge Fittings, I used a M10x1.0 Male (Convex) to AN-3 Male Adaptor on the slave cylinder, turned it through 180 degrees rotation (upside down), and used 400mm of 600-03CL Braided Hose, with an M10x1.0 Female (Concave) fitting at the hard line end, and an AN-3 Female fitting at the Slave Cylinder end.

Cost less than AUD$50 in parts, so about £20. Pretty good value I thought.
E30racing.com.au - Like Production BMW Cup, but upside down!
Top

Return to “Group Buys and Discounts”