**hot tuning manifold**
Moderator: martauto
Sebastian35 wrote:Correct me if i am wrong but I have seen this manifold on the bimmerforums.co.uk they were offering them for £180 including shipping. Can us as E30 zone members get the offer if there is enough interest?
if you look in the traders section, these are available now for £185 deliveredJim320i
When are you getting these in? Can you message me when you do as I would mind one...
mine is on its way

- Sebastian35
- E30 Zone Newbie

- Posts: 78
- Joined: Wed Sep 02, 2009 11:00 pm
Hi louise
I have just ordered one of these exhaust- I asked for the e30 Zone member deal. Now i have just logged on and realise i have been charged more and will not get the brace either....
Please can you make sure i get this offer my payment transaction number for paypal is:D #9F740379HM877294D
Many thanks
Sebastian
I have just ordered one of these exhaust- I asked for the e30 Zone member deal. Now i have just logged on and realise i have been charged more and will not get the brace either....
Please can you make sure i get this offer my payment transaction number for paypal is:D #9F740379HM877294D
Many thanks
Sebastian
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
Hi,
I will refund you the difference!
I will refund you the difference!
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
E30_Crazy
- E30 Zone Regular

- Posts: 733
- Joined: Fri Mar 05, 2010 11:00 pm
- Location: Alaska, USA (Lived in Brandon, Suffolk)
Is there any difference with the clearance factor with this manifold between pre-facelift and facelift? (mainly the steering linkages) I have a tech1 (prefacelift) sport RHD.
And what was I reading about a little earlier in the thread about having to weld and use a dremel to grind it back down? Does this need modification to fit, or does it bolt into place? I have a scorpion setup on it, which is a direct oem fit, correct? (center box delete, but all connecting points are same).
Been looking for a new manifold, as mine has developed several leaks....
Still have the mani/brace combo?
Thanks!
And what was I reading about a little earlier in the thread about having to weld and use a dremel to grind it back down? Does this need modification to fit, or does it bolt into place? I have a scorpion setup on it, which is a direct oem fit, correct? (center box delete, but all connecting points are same).
Been looking for a new manifold, as mine has developed several leaks....
Still have the mani/brace combo?
Thanks!
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
hi,
our manifold will fit your car, modification is not need. ( we have had a weong batch in the past, but that's all resolved now)
The combi offer is still on!
our manifold will fit your car, modification is not need. ( we have had a weong batch in the past, but that's all resolved now)
The combi offer is still on!
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
George_Of_The_Jungle
- E30 Zone Regular

- Posts: 637
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Daventry
When is this group buy likely to run out / close / finish?
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
it wil stay open, and you can buy individual
as we had a group buy in the past but the offer is still runing
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
TouringTash
- E30 Zone Team Member

- Posts: 3804
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
I may treat my 325 to a 6 branch for christmass what is the total cost to the UK please.
318i Touring
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
hi
that's 195 GBP shipped
regards,
Louise
that's 195 GBP shipped
regards,
Louise
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
TouringTash
- E30 Zone Team Member

- Posts: 3804
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
I think it is fella, read a post or three above my other one on this page.
318i Touring
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
yes it is!!!
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
yes you can send me a pm with your email address and I will send you a paypal invoice
regards,
Louise
regards,
Louise
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
Yes they, do but for me it's easy to say, as I'm the seller 
I hope some other zoners could reply to your post and telle them their experiences. Some zoners dynotested the manifold and I'm sure yoy must can find more reviews about the manifold at the zone as there are a lot of post about it.
Merry Xmass
Regards,
louise
I hope some other zoners could reply to your post and telle them their experiences. Some zoners dynotested the manifold and I'm sure yoy must can find more reviews about the manifold at the zone as there are a lot of post about it.
Merry Xmass
Regards,
louise
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
hi, I was going to install this, and as it was said there should not be any modifications done

but when I looked at my exhaust, I noticed that it's not just fit in, I do need to cut my exhaust to connect the new bit. Is this because my exhaust is not OEM? or the cutting should be done on all E30's ? Or I missing something?
this is my exhaust, the bended part before the box suppose to be the connection point.

box together with the long pipe is one piece. Basically it's connects to OEM manifold and other joint only after the box.

Any suggestions?

but when I looked at my exhaust, I noticed that it's not just fit in, I do need to cut my exhaust to connect the new bit. Is this because my exhaust is not OEM? or the cutting should be done on all E30's ? Or I missing something?
this is my exhaust, the bended part before the box suppose to be the connection point.

box together with the long pipe is one piece. Basically it's connects to OEM manifold and other joint only after the box.

Any suggestions?
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
It does always fit 6 branches, it def will come because of a not OEM exhaust system
regards,
Louise
regards,
Louise
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
great thanks!
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
- Contact:
sounds great!
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!





