I'm getting my LPG-specific ignition map done in a fortnight.
TWIN MAP MOTRONIC ECU
Moderator: martauto
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
- Contact:
Stuart
get the map done and send me the chip, I'll have to solder one up for you dude
PCB is a non starter due to very low interest in the product, costs are too high for a small production run, I needed at least 60 to start the run, 3 confirmed and 4 maybes just isn't eough to justify the investment my end.
I can do these individually the hard way for less than the Pcb costings at this quantity.
get the map done and send me the chip, I'll have to solder one up for you dude
PCB is a non starter due to very low interest in the product, costs are too high for a small production run, I needed at least 60 to start the run, 3 confirmed and 4 maybes just isn't eough to justify the investment my end.
I can do these individually the hard way for less than the Pcb costings at this quantity.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
cypriot_boy_2k7
- E30 Zone Squatter
- Posts: 1641
- Joined: Mon Jan 29, 2007 11:00 pm
- Contact:
can u do m40s?
-
StuBeeDoo
- Engaged to the E30 Zone
- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
Ant, I'll e-mail you again.Ant wrote:Stuart
get the map done and send me the chip, I'll have to solder one up for you dude
PCB is a non starter due to very low interest in the product, costs are too high for a small production run, I needed at least 60 to start the run, 3 confirmed and 4 maybes just isn't eough to justify the investment my end.
I can do these individually the hard way for less than the Pcb costings at this quantity.
Situation's changed this end. I'm still wanting to have 2 seperate chips at some point, though.
This is why I no longer drive an E30......
-
steve_k
- E30 Zone Team Member
- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
- Contact:
@ant, would it be possible to run the twim maps along with the maf set up for the m20 you are offering?
if so how much is it?
how long does it take?
let me know as in the next month or so i could/will be looking into this.
if so how much is it?
how long does it take?
let me know as in the next month or so i could/will be looking into this.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
TouringTash
- E30 Zone Team Member
- Posts: 3804
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
Is this still a goer fella?
Could do it the same time the new lump goes in
along with a MAF set up
Could do it the same time the new lump goes in
along with a MAF set up
318i Touring
-
TouringTash
- E30 Zone Team Member
- Posts: 3804
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
The little tinker if full of good ideas 
With the stupid things monkeys do when they get their hands on a proper drivers car doesn't bear thinking about. Well it wouldn't need thinking about if this was done.
Remember the guy with the M3 in the states?
Makes this look like a must have for anyone who puts their pride and joy in for any work.
With the stupid things monkeys do when they get their hands on a proper drivers car doesn't bear thinking about. Well it wouldn't need thinking about if this was done.
Remember the guy with the M3 in the states?
Makes this look like a must have for anyone who puts their pride and joy in for any work.
318i Touring