M30 Engine mounts.

[leeparkes]

As some of you know i have been getting sets of these M30 mounts made up over the past few weeks, they are virtually the same as the e30.de mounts made from 8mm thick steel and welded to a high standard. I have been running a set of these on my own M30'd E30 for the last month to 'test' them and they were fine (there still on) they are for position 2 or 3

Here's the pics










The mount that goes on the inlet side has been modified to give a bit more clearance around the one bolt hole where the manifold support sits so less grinding of the support is needed but you will still need to open up the hole a touch as normal

The mounts are £100 delivered

Paypal, Cheque, postal order and bank transfer all accepted

Cash on collection welcome

They will be sent out next day recorded delivery with a 'reliable' courier, for example if you pay me on a monday before 4pm they will be sent out that day and you will receive them next day

collection from DY1

Thanks
Lee

Feedback thread added http://www.e30zone.net/modules.php?name ... c&t=162432



Modified mounts for pos 3.5 are still in the pipeline but non made up yet
Ill keep you posted

[ImysE30]

Look good Lee

Will be in touch soon regarding the 'modified' mounts

[leeparkes]

Just one set of the 'original' mounts left now £90 delivered or £80 collected

[ImysE30]

Is there definitely enough room for position 3.5 Lee

[leeparkes]

Is there definitely enough room for position 3.5 Lee

I will be getting a set made 'soon' and i will test them on my car but i am confident the M30 will go back further than position 3.

The only problem i might come across is one of the manifold flanges is very close to the bulkhead so it may need 'massaging' back a bit to give a little more clearance, the bulkhead area where the head sits will also need knocking back too but this is standard procedure anyway when fitting an M30.

Ill keep you posted as soon as i know anything.

[Rav335uk]

Is there definitely enough room for position 3.5 Lee

I will be getting a set made 'soon' and i will test them on my car but i am confident the M30 will go back further than position 3.

The only problem i might come across is one of the manifold flanges is very close to the bulkhead so it may need 'massaging' back a bit to give a little more clearance, the bulkhead area where the head sits will also need knocking back too but this is standard procedure anyway when fitting an M30.

Ill keep you posted as soon as i know anything.

Don't knock it out toooo far, remember the brake bars just behind the firewall

[ImysE30]

Is there definitely enough room for position 3.5 Lee

I will be getting a set made 'soon' and i will test them on my car but i am confident the M30 will go back further than position 3.

The only problem i might come across is one of the manifold flanges is very close to the bulkhead so it may need 'massaging' back a bit to give a little more clearance, the bulkhead area where the head sits will also need knocking back too but this is standard procedure anyway when fitting an M30.

Ill keep you posted as soon as i know anything.

Don't knock it out toooo far, remember the brake bars just behind the firewall

That's what i was thinking too, too much bashing and snap!

Look forward to the updates Lee

[leeparkes]

I will be getting a set made 'soon' and i will test them on my car but i am confident the M30 will go back further than position 3.

The only problem i might come across is one of the manifold flanges is very close to the bulkhead so it may need 'massaging' back a bit to give a little more clearance, the bulkhead area where the head sits will also need knocking back too but this is standard procedure anyway when fitting an M30.

Ill keep you posted as soon as i know anything.

Don't knock it out toooo far, remember the brake bars just behind the firewall

That's what i was thinking too, too much bashing and snap!

Look forward to the updates Lee

Thats why you have someone inside the car watching while the bashing commences

Only needs to go back about 10mm

[Rav335uk]

Let me know too, as I might have a set.
If it does go back far enough, you think you might be able to fit the viscous back on.
I've seen a vid on youtube somewhere and that guys got one on his M30

[ImysE30]

Yeah i seen that video too, could give it ago i guess

[leeparkes]

TTT

[leeparkes]

Yearly bump

[leeparkes]

Another year bump.

[leeparkes]

And another

[mccarthy]

Might be interested in a set of these. Do you have any ready to go or can you let me know lead time please?

[leeparkes]

Pm'd

[age]

anything further on position 3.5 lee?

[BMW_E30vert]

anything further on position 3.5 lee?

^^^Also interested