M30 Lightened Flywheels and Engine Mounts

[BigBavarian]

I have finally managed to source an m30 flywheel and my flywheel people are ready to start producing some light weight m30 flys.
They are the later style flywheel for the 34 clutch which is considerably cheaper than the early one.
No weightds yet as tey have not made any, i have ordered 3 initially, but i can get them to up production if anyone else is interested.
Makes a huge difference to any engine, M20 ones sell well, have sold S50 ones too, ask Jhonno what he thinks of his.
Price will be in the range of the M20 ones, the more the cheaper potentially.
They will be ready in a couple of weeks.

Can also supply the E30 m30 engine mounts for either the early E28 engines or the later e34 ones.

Thanks
Richard

[Jhonno]

These flywheels are awesome.. They look too good to fit, and bring an engine to life.

If you are doing an engine swap you'd be daft not to fit one..

The only 'negative' (which is generic light flywheel related) is when pushing on/tracking you need to heel and toe, or you risk locking the rear wheels on downshift as I did at the top of Foxhole at the Nurburgring, as the revs drop a lot quicker

S50 flywheel..

[Dave_M3]

Needing to heel and toe is no disadvantge... An E30 is probably the easiest car in the world to do it with

[zaust]

Any idea on price for the m30 one please.

[cliffybabe]

how much do m20 ones go for??

[Dave_M3]

230 or something along those lines for the M20 one I think Cliffy.

I was going to get one but my gearbox decided to let go sooner planned so just had to machine a standard M20 one down but hopefully I'll be able to get one of these the next time I'm opening a bell-housing for an M42, M20 or M52

[ed325i]

Can you do flywheels for the e28 m30 ?

Ed

[BigBavarian]

This is the e34 m30 but i believe, and correct me if i am wrong - sure someone will, they will fit the e28 aswell which is why i had them done, e34 clutches are cheaper than e28 ones and was going to fit on to my m535i.

[Driftben]

Yep put me down for a M30 fly and what price are the M30 mounts too?

Cheers
ben

[BigBavarian]

M30 flywheel, lead time 2 weeks from today £250-00
M20 flywheel, lead time 2 weeks from today £250-00
S14 flywheel, on shelf £260-00
S50 flywheel, lead time 2 weeks from today £260-00
All take standard clutches, m30 fly designed for e34 clutch as cheaper than e28 clutch.
Can get them for race clutches too, slightly lighter, same price.
S50 flywheel suitable for S52 too.
Can get S50 flywheel to take M5 clutch in reverse as per Jhonno's conversion.
Also available S54 flywheels, either lighter or ones which are relevant for the US race series where flywheel reduction is limited so they are made with the weight in the middle of the flywheel to keep the maximum effectiveness of a lightened flywheel. POA.
Looking for someone with a mini cooper who would like to try the mini one which is matched to a clutch for max effectiveness so can get some feedback on the conversion. Discounted price available, PM me.
Please PM me with all your requirements.
Thanks
Richard

[BadDave]

Richard

Just out of curiosity, what's the weight on the M20 flywheel???

[cplagz]

Are these machined one-piece billet? I'm interested in a M20 one.

[Driftben]

Do we know what the M30 fly weighs yet? Plus put me down for a m30 fly too. And what's the price on the m30 engine mounts?

Cheers

[minicooper172]

Are the M30 mounts position 2? And how much are they?

[BigBavarian]

Bad Dave, m20 flys weigh in at 4.3kgs

Cplagz, one piece billet, teeth cut into billet so no ring gear issues

STiBen - not had an M30 fly to weigh. yet but significantkly less than standard. Will weigh and post as soon as i get one in my hands

Minicooper172 - They are 2 possible position mounts, 1 or 2, will get price sorted this week.

[cplagz]

Keen on a M20 one. Would require postage to Australia. I'll talk to a few others over here and see if I can drum up some interest to send one package over

[Driftben]

LOvely cheers Richard.

[Rav335uk]

I hope my M30 fly is ready for me to pick up when I come over to the meet.
Actually if I pop over early maybe we could get it fitted, try b4 you buy sort of thing

[Cypriotgeeza]

how much for the Engine mounts for an M30 B35 conversion? i havent got a clue what "position" i would need tho lol

[Driftben]

hows these flywheels getting on?

[minicooper172]

Any news on the price of these engine mounts?

[Dave_M3]

What weight are the S50 flywheels?

[Rav335uk]

I think we are all wating for "Ricardo" to pull his finger out.

[Dave_M3]

My E36 6 speed has thrown in the towel (or something clutch related inside the bell-housing which I'm not going splitting until I can fit the E46 gearbox) so its going to miss out on the rest of the fun on the slippy roads until I sort something

[Dave_M3]

Can I order a S50 one?

[Baurluvva]

Price on the mounts please!!

[Rav335uk]

Ricardo, will be over next Sat to pick up my M30 flywheel.

[topbananabm]

do you have pictures of the mounts??