Help on M42 rebuild

Moderator: martauto

Post Reply
User avatar
Kizzu
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Tue Sep 08, 2015 11:00 pm

Sun Sep 18, 2016 10:30 am

So basically I have an 80k (supposedly) 93 e36 m42 block with the front crankcase ventilation that has been sitting for 8 years and want to make a full (almost) rebuild of this block. what will I need apart from timimng chain kit, lifters, rings and bearings?

Engine has an e30 intake, ported valves and increased cr.

Thanks
Last edited by Kizzu on Sun Sep 18, 2016 11:50 pm, edited 3 times in total.
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Sun Sep 18, 2016 2:02 pm

Does this engine have a timing belt? The M42 normally has a chain.
User avatar
Kizzu
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Tue Sep 08, 2015 11:00 pm

Sun Sep 18, 2016 11:51 pm

DHFiS wrote:Does this engine have a timing belt? The M42 normally has a chain.
Sorry my bad. I knew it had a chain, don't know why I wrote that. Thanks tho :)
Andyboy
Alpina Colada
Posts: 12572
Joined: Mon Sep 11, 2006 11:00 pm

Sun Dec 18, 2016 8:10 am

1993 should mean it has the timing chain curved lower left hand guide rail and not that stupid gear - converting to the curved guide rail is essential on a rebuild now. The gear is okay - it the allot timing case that fatigue fractures where the gear's retaining bolt screws in.
Post Reply