Or does anyone know of any super uprated packs that could be used?
m50 coils
Moderator: martauto
-
Jibberingloon
- E30 Zone Regular

- Posts: 260
- Joined: Sun Oct 10, 2010 11:00 pm
- Location: Oxfordshire Baby
- Contact:
No idea, but I've given DanThe 2 sets of M50 coils in good condition if you are after a set ;)
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
Iv tried both coil packs, the Bosch and the other...(standard ? ) and iv had problems with both makes breaking down,
That could be down to them being old/well used,
It would be good if there was an "upgrade" option
That could be down to them being old/well used,
It would be good if there was an "upgrade" option
M50 Turbo!!!
I shall say no more 
-
DanThe
- E30 Zone Team Member

- Posts: 28644
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
- Contact:
Ive only ever had to replace one coilpack that wasnt obviously damaged, ive seen them blow the sides out also, the connector had come loose and dropped onto the exhaust manifold which caused a few short circuits 
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
Iv had 2 break down on me so far,
1 on the mapping session, so I replaced all 6 of them with the ones I bought from you last year,
and 1 of those broke down yesterday
Iv just bought another used set of 6, so let's see how long these last,
Might just get a stock pile of the buggers.
1 on the mapping session, so I replaced all 6 of them with the ones I bought from you last year,
and 1 of those broke down yesterday
Iv just bought another used set of 6, so let's see how long these last,
Might just get a stock pile of the buggers.
M50 Turbo!!!
I shall say no more 
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
Here you go:
http://www.okadaprojects.com/usa/products_direct.htm
He also saw an 8hp rise from fitting them on back to back dyno runs, but he was having issues with the sparks blowing out beforehand
http://www.okadaprojects.com/usa/products_direct.htm
He also saw an 8hp rise from fitting them on back to back dyno runs, but he was having issues with the sparks blowing out beforehand
