shite mounts ?

Moderator: martauto

magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Mon Apr 18, 2011 7:29 pm

i'm having fun with these at the mo,the movement is bad enough to foul the zaust down pipe on the steering linkage.

click the pic for a vid

Image

not sure where these cam from as craigeeb ordered them with his ones at the same time,i've just ordered some more from here

3rd mounts down

http://www.pelicanparts.com/bmw/catalog ... an_pg4.htm#

so i hope this sorts out the problem. anyone else had this trouble? craig say's his seem ok :?

and yes i have checked they are tightened up.
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Mon Apr 18, 2011 7:37 pm

Can't say I've had that problem with mine mick :?
I used e28 m5 hockey puck rubbers and she's been fine mate
A 2 door e30 with 8 cylinders, what could be better winkeye :D
Cook318IS
E30 Zone Addict
E30 Zone Addict
Posts: 4586
Joined: Fri Jun 08, 2007 11:00 pm
Location: Torquay

Post Mon Apr 18, 2011 7:40 pm

Thats an awful amount of play in that 8O Im using the e28 m5 hexagonal mounts and there isnt alot of play in that - although by the looks of dans thread they only last a few years
Image
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Mon Apr 18, 2011 7:57 pm

e30-dk wrote:Can't say I've had that problem with mine mick :?
I used e28 m5 hockey puck rubbers and she's been fine mate

where from ? and how much ? got any pics of them ???

what's the euro ones like as i've just canceled the order above as Dez gave the wrong link i think as dans link has a different part number and his ones are more expensive

http://www.pelicanparts.com/cgi-bin/sma ... Each%20%20

total shipped on pair of these = £45.36
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Mon Apr 18, 2011 7:58 pm

Yeah mate, it was because of danthe's advise that I went and bought the hockey puck ones :)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Mon Apr 18, 2011 8:01 pm

@mick- I payed around £44 for the pair in euro parts. Might have gone up slightly since but then it was only about 4 months ago I bought them!
If you search my build thread in the m50 section I added a pick of the difference between the m20 hockey pucks and the e28 m5 ones.... :)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Mon Apr 18, 2011 8:01 pm

e30-dk wrote:Yeah mate, it was because of danthe's advise that I went and bought the hockey puck ones :)
where from ? and how much ? got any pics of them ???
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Mon Apr 18, 2011 8:09 pm

As above mate ^, search my build thread. I added a pic of them :)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Mon Apr 18, 2011 8:16 pm

Duke137 wrote:http://www.eurocarparts.com/ecp/c/BMW_5 ... 8268b&ENGM

There you go boys, that is what I have and what Ant definately has as I gave him the part number I'm 99.9% of that

8)
fook it i'm off to euro's in stockton tomorrow,another £56 :roll:
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Apr 18, 2011 9:02 pm

Could they be M20 mounts Mick? Proper soft they are!
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Mon Apr 18, 2011 9:14 pm

Mick PM on route....
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Mon Apr 18, 2011 9:50 pm

DanThe wrote:Could they be M20 mounts Mick? Proper soft they are!
not m20 Dan,here's the articles

Image
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)