BBTB

Moderator: martauto

Post Reply
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Wed Apr 29, 2015 11:25 pm

Anyone bought a BBTB off this seller?

http://www.ebay.co.uk/itm/Bmw-e36-m52b2 ... 5b107848de
Image
User avatar
hotross
E30 Zone Newbie
E30 Zone Newbie
Posts: 38
Joined: Mon Apr 27, 2015 11:00 pm

Wed Apr 29, 2015 11:58 pm

I have one on the car that i bought and the seller did say it sicks now and then but may need a new cable maybe needed to stop it sicking.
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Thu Apr 30, 2015 1:24 pm

From the same seller?
Image
AndyZippy
E30 Zone Regular
E30 Zone Regular
Posts: 319
Joined: Tue Apr 24, 2012 11:00 pm
Location: Glastonbury, UK

Thu Apr 30, 2015 5:24 pm

I was wondering about these too, keen to know if they are sticky or whistley or if they are ok..
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Thu Apr 30, 2015 6:34 pm

More trouble than the 0.8hp they are worth IMO
User avatar
bosers
E30 Zone Regular
E30 Zone Regular
Posts: 496
Joined: Sat Jun 29, 2013 11:00 pm
Location: Devon

Thu Apr 30, 2015 7:16 pm

I had my M20 one enlarged by him, it was a nice job and he changed the seals around the shaft which prob helped more than the enlargement!
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Fri May 01, 2015 2:11 pm

When fitting an m52 throttle body onto a m50 manifold do you need to fit one of those adaptor plates or does it go straight on?
Image
User avatar
bosers
E30 Zone Regular
E30 Zone Regular
Posts: 496
Joined: Sat Jun 29, 2013 11:00 pm
Location: Devon

Fri May 01, 2015 2:52 pm

You need a plate.
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Fri May 01, 2015 3:01 pm

Yeah after googling it i found that i needed one.
Image
Post Reply