Wiring question

Mon Mar 17, 2014 1:06 pm

I've come to make my wiring harness today and noticed a few pins missing on the C101 plug to what the loom table says to wire up.

8 yellow/white pin 11 blue plug inst cluster- fuel rate input
9 black pin 7 blue plug inst cluster- engine speed input
10 purple/green pin 20 check panel- dynamic oil level
14 blue/yellow pin 10 white plug inst cluster- speed signal out
15 black/green pin 1 blue plug inst cluster- from unloader relay

Are these anything to worry about? I assume they aren't and will just relate to check panel and instrument cluster?

Cheers

Mon Mar 17, 2014 6:25 pm

are you looking at an 88+ wiring diagram? they are different that the <87

Mon Mar 17, 2014 8:44 pm

Yes i am, that never crossed my mind, there isn't a table for the pre facelift loom that i can see on the zone

Tue Mar 18, 2014 12:09 am

I did my own wiring when I put the S50 in to my '87. Still got the diagrams somewhere in excel, let me know if you need a hand and I'll look for them.

Tue Mar 18, 2014 9:19 am

Please matey i would really appreciate it.