re-connecting loom

[booomer]

Whats the easiest way of re-connecting the loom to the engine? i was under the impression that all the block connectors were of a unique shape/size/colour so would only fit to their corresponding plug. I started looking at them and this is obviously not the case. Anyone got a good tip for doing this?

[Brianmoooore]

The easiest way is to label them when you take them off!
In the absence of that, you'll have to peel back the rubber boots and check the colours of the wires to each plug.

[booomer]

I was fearful someone would say that! Thanks anyway, here we go...

[booomer]

The easiest way is to label them when you take them off!
In the absence of that, you'll have to peel back the rubber boots and check the colours of the wires to each plug.

Is there a list available to show which colour wires go where?

[Brianmoooore]

Wiring diagrams are here, with the colours shown on the diagrams: http://www.autolib.diakom.ru/CAR/BMW/

[Alpina99]

Wiring diagrams are here, with the colours shown on the diagrams: http://www.autolib.diakom.ru/CAR/BMW/

Is it my computer or does this come up in a foriegn language ?
Thanks,

[Brianmoooore]

It's a Russian site, so comes up in Russian! Drop down boxes are in English though.

[Alpina99]

Thanks,