Driveable M30 but wiring left?

Post Mon Jul 19, 2010 9:07 pm

Hello there

Thank you for everyones helpf with my M30 conversion. I now have the engine running connecting the six wires as shown previously. Here is my first drive with only the manifolds on (exhaust time Friday):

I am having a problem with regards the wires left as my loom has been cut. Here is a list of the wire colour codes if anyone could shed a light on this I would be greatful.

White/black
White/black
Green
Blue
Black/white
Green/yellow
Green/white
White/green
Grey
Black
Green/Black

Also the car was a 1990 320i SE

Any help would be much appreciated!

Regards Steven

Post Mon Jul 19, 2010 9:25 pm

I'm sure it is in the Wiki somewhere.
I can't remeber off the top of my head.

Post Wed Jul 21, 2010 5:26 pm

I did have a look through the Wiki but didn't have any luck finding anything to help me

Post Wed Jul 21, 2010 11:27 pm

Im close to useless with electrics so wont be much help

What havent you got working, does it drive as it should?

Post Thu Jul 22, 2010 11:10 pm

I only have the 6 wires on the C101 plug connected. They are the wires to make it run.

So I don't have a speedo or anything like that at the moment.

Post Fri Jul 23, 2010 12:57 am

i found this slighty helpful when trying to sort my wiring:

http://www.e30zone.net/modules.php?name ... c&t=158933

stolen from the m50/52 boys.

Post Mon Jul 26, 2010 12:44 am

Thank you everyone! Yet again you all have helped me greatly. All the wiring is now complete