Hello,
I have a m30 3.5 which apparently has a lower comp bottom end which is got from jim on here.
I am in the process of turbo conversion and having a turbo manifold built,
the question is does anyone know if I need to use a cometic head gasket, I plan to use ARP bolts but wasn't sure on the compression factor.
anyone help?
M30B35 Turbo help
Moderator: martauto
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
If you only plan on running .6 - .9 then you will be fine. If you want to wind the boost up properly then a copper head gasket will be better in the long term.
M30 Tech 1 Touring on gas.
-
E30Oldschool
- E30 Zone Newbie
- Posts: 7
- Joined: Wed Sep 28, 2011 11:00 pm
- Location: Australia
G'day mikeyce30,
How is your E30M30 turbo setup progressing? I'm really interested to see how you have done it, as I'm about to start a build myself, but i'm no mech and resources are limited here in Perth Au. Looking forward to hearing from you mate.
How is your E30M30 turbo setup progressing? I'm really interested to see how you have done it, as I'm about to start a build myself, but i'm no mech and resources are limited here in Perth Au. Looking forward to hearing from you mate.