Oh no... all done and running now.
Moderator: martauto
-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
Missed your chance to brutally skim the head there marc
1mm off mine when i had it off, no compensation in cam timing, std chip, 220bhp and 238lb.ft of torques... Worth doing
I wish i had before and after figures though 
1mm off mine when i had it off, no compensation in cam timing, std chip, 220bhp and 238lb.ft of torques... Worth doing
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
Ahaa... So the old one was standard spec and this has a lot of meat removed? Should be interesting to see what happens 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
I should really measure it top to bottom, find out what the difference is from standered then. Don't know if its because I haven't heard it for a while but it did sound more meaty than last time upon warm up. The last one had definitely been skimmed before as it had all the bills when I bought the donor. But it was done by a BMW specialist so I would imagine that a thicker HG was used.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
- Contact:
No worries Marc, I bought 5 yesterdayzaust wrote:Ah poo. Rav i did not send the leather leaver yet.
I didn't want to bother you by phoning

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL



