Driveable M30 but wiring left?

[Pembo]

Hello there

Thank you for everyones helpf with my M30 conversion. I now have the engine running connecting the six wires as shown previously. Here is my first drive with only the manifolds on (exhaust time Friday):



I am having a problem with regards the wires left as my loom has been cut. Here is a list of the wire colour codes if anyone could shed a light on this I would be greatful.

White/black
White/black
Green
Blue
Black/white
Green/yellow
Green/white
White/green
Grey
Black
Green/Black

Also the car was a 1990 320i SE

Any help would be much appreciated!

Regards Steven

[Rav335uk]

I'm sure it is in the Wiki somewhere.
I can't remeber off the top of my head.

[Pembo]

I did have a look through the Wiki but didn't have any luck finding anything to help me

[leeparkes]

Im close to useless with electrics so wont be much help

What havent you got working, does it drive as it should?

[Pembo]

I only have the 6 wires on the C101 plug connected. They are the wires to make it run.

So I don't have a speedo or anything like that at the moment.

[sheebie]

i found this slighty helpful when trying to sort my wiring:

http://www.e30zone.net/modules.php?name ... c&t=158933

stolen from the m50/52 boys.

[Pembo]

Thank you everyone! Yet again you all have helped me greatly. All the wiring is now complete