And im wondering what chip will i have to use on my 325e with 325i ECU... Will it work with 325i chip ? Or should i make 28pin chip with old 325e .bin file ?
Thank you guys for any answers
Some questions about motronic 1.0 > 1.3 conversion.
Moderator: martauto
-
Radvis
- E30 Zone Newbie
- Posts: 1
- Joined: Sun Jan 27, 2013 11:00 pm
Hey there, i am owning 325e '86 with motronic 1.0 (0 200 261 027) and i am going for a 1.3 (0 200 261 173) conversion. As i know 1.0 plug has 35 pin, and 1.3 has 55, so difference by 20 pins. 1.3 Loom have more wires and when i will put it to 325e where should i connect those free wires ? Just leave it hanging/cut those extra wires ?
And im wondering what chip will i have to use on my 325e with 325i ECU... Will it work with 325i chip ? Or should i make 28pin chip with old 325e .bin file ?
Thank you guys for any answers
And im wondering what chip will i have to use on my 325e with 325i ECU... Will it work with 325i chip ? Or should i make 28pin chip with old 325e .bin file ?
Thank you guys for any answers
-
macas
- E30 Zone Squatter
- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
Contact "speedtouch" on here,hes the man with the answers your after,im sure he will be along soon anyway.... 
-
Duke137
- Married to the E30 Zone
- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
All in the wiki
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.