Moderator: martauto
An all too familiar problem!nickso wrote:i would come over depending on work and if the e30 is back on the road, second bit could be a problem.
Have you shifted on your M3 racing shell ? Unless I'm being daft I couldn't see it on your sig.e21Jason wrote:Sounds good, you a got e30 for the roam yet
Jason
well the only things stopping it being roadworthy ( i hope) are an exhaust, a torque wrench for the front hubs, fluids and a radiator and fan loom....a million other things need doing on it of course but i doubt it will ever be anything other than a work in progress.320Touring wrote:An all too familiar problem!nickso wrote:i would come over depending on work and if the e30 is back on the road, second bit could be a problem.
Would be cool if you and Jason could make it- at least you'll probably be able to keep up
could just about make it. 
cheers dave.BadDave wrote:I'll pop down with the executive chariot Neil.
Woud pop down through the week, but have postponed holidays in a wee scam to get more money & extra time off in May.
Nick,If I find one of the old front calipers,I'll pop a spring through tthe letterbox some evening.
If you have a 1/2" dr socket for the front hubs(if it's 36mm I can bring one of them too), I'll bring along a tool for the job at the same time.
Doubt it, too much work on so I can't get near the cabby to get the new exhaust system on and get it through an MOT.e21Jason wrote:Hi Colin yes the e30 m3 BTCC is one to another zoner, you up for this meet
Jason
Just stock non M ones Nick.nickso wrote:cheers dave.BadDave wrote:I'll pop down with the executive chariot Neil.
Woud pop down through the week, but have postponed holidays in a wee scam to get more money & extra time off in May.
Nick,If I find one of the old front calipers,I'll pop a spring through tthe letterbox some evening.
If you have a 1/2" dr socket for the front hubs(if it's 36mm I can bring one of them too), I'll bring along a tool for the job at the same time.
mind i'm on m3 running gear, i looked up the part numbers and the springs seem different for the m3, is it m3 ones you have?
the hub nut is 46mm and 3/4 drive. i have that in hand as my dads mate has one for me next week.
.. depending on me being at knockhill to help out my mate who is running his Alfa Sud race car at the classic's race on the same day?
what car park will you be parking/meeting at?320Touring wrote:Right, We'll be in Inverary for between 1.30pm and 2.
Seems this topic is all over the place and God knows who's actually gonna turn up, so I'll kick it off here Neil ;)320Touring wrote:Right, We'll be in Inverary for between 1.30pm and 2.
We'll Be having lunch at the following Cafe
Brambles Bistro
5 Main Street West, Inveraray PA32 8TU,
01499 302252
The food is good and reasonably priced
We'll then run to Connel via the A 816 so that leaves folks pointing in the right direction for heading home.
So Who is coming then?
grantfk10 wrote:Seems this topic is all over the place and God knows who's actually gonna turn up, so I'll kick it off here Neil ;)320Touring wrote:Right, We'll be in Inverary for between 1.30pm and 2.
We'll Be having lunch at the following Cafe
Brambles Bistro
5 Main Street West, Inveraray PA32 8TU,
01499 302252
The food is good and reasonably priced
We'll then run to Connel via the A 816 so that leaves folks pointing in the right direction for heading home.
So Who is coming then?
1.grantfk10 3i8i Cabby
2.
3.
