hi am posting this on behalf of a friend. he is putting a 325 24v e36 engine into his e30 face lift esate and would like some info on which mounts to use. everytime he finds out info its always different. which sump does he need and which engine mounts does he need to run. is there any info on this site about this conversion?
thanks .
e36 into e30
Moderator: martauto
-
alloyproducts
- E30 Zone Newbie
- Posts: 98
- Joined: Wed Jul 25, 2007 11:00 pm
- Location: bury st edmunds- suffolk
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
BMW DON'T AND NEVER HAVE MADE ESTATES!!!!!alloyproducts wrote: into his e30 face lift esate
If you look in the archives of our engine swap forum, you will find the longest thread ever written on just this subject.is there any info on this site about this conversion?
thanks .
You find different answers, because there's more than one way of doing things! The only thing that is definite is that you must use a M50 E34 sump and oil pick up.
Before of info on sites aimed at LH drive cars. The problems (and possible solutions) are very different.
-
alloyproducts
- E30 Zone Newbie
- Posts: 98
- Joined: Wed Jul 25, 2007 11:00 pm
- Location: bury st edmunds- suffolk
thanks for the info. will have a read of it. that could be were he is going wrong as he seems to read alot of info from the us sites.
sorry i forgot they were/are called tourers
sorry i forgot they were/are called tourers