Has anyone got any Geo Settings for a track bias car.
Cheers
Mark
PS its a M50 2.5 on Apex Springs & Dampers with adjustable top mounts and soon to have modded rear beam too ;)
Any Geo Settings please........
Moderator: martauto
-
Jibberingloon
- E30 Zone Regular

- Posts: 260
- Joined: Sun Oct 10, 2010 11:00 pm
- Location: Oxfordshire Baby
- Contact:
-
Black_Potato
- E30 Zone Regular

- Posts: 774
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Colchester
- Contact:
tyres?
3x S14 Rightness....


-
Jibberingloon
- E30 Zone Regular

- Posts: 260
- Joined: Sun Oct 10, 2010 11:00 pm
- Location: Oxfordshire Baby
- Contact:
Various!
We have 3 sets of wheels for the car Slicks / R888 / Road Tyres!
So a bit of everything
We have 3 sets of wheels for the car Slicks / R888 / Road Tyres!
So a bit of everything
-
Black_Potato
- E30 Zone Regular

- Posts: 774
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Colchester
- Contact:
Well its tyre specific, but you could try... -2 front, -1 rear camber, 1mm total toe out front, -9 caster front, rear toe leave oem.
That will be too much front camber on the road and not enough for track day slicks. If you have adjustable front top mount you want a little for the road, say .5 or 1 degree front , for track use with r888 etc.. around 3.
These are only guide lines as there are.loads of other variables.
That will be too much front camber on the road and not enough for track day slicks. If you have adjustable front top mount you want a little for the road, say .5 or 1 degree front , for track use with r888 etc.. around 3.
These are only guide lines as there are.loads of other variables.
3x S14 Rightness....


-
Jibberingloon
- E30 Zone Regular

- Posts: 260
- Joined: Sun Oct 10, 2010 11:00 pm
- Location: Oxfordshire Baby
- Contact:
Good startering point ;)
Thanks
Thanks
