Looking for a good Engine builder

[flyingfarrier]

Hi can anyone out there recommend a good Engine tuner, i'm building an e30 for a 2 ltr championship in the Middle east, the rules are free as far as engines go only that they must run a single throttle body with 50mm restrictor and be 2 ltr, my budget is not bottomless and i need a quick turn around as the championship starts in october, so any help contacts etc would be very appreciated

please help me beat the honda civics!!!!!!

[e21Jason]

HI

You need a 2.0l s14 or 2.0l m42 with a custom inlet manifold asuming you have to run a bmw engine. 3-5k miniumm.

Jason

[UweM3]

HI

You need a 2.0l s14 or 2.0l m42 with a custom inlet manifold asuming you have to run a bmw engine. 3-5k miniumm.

Jason

3-5k for a tuned 2.0l S14 is a bit optimistic if you aske me. Especially considering that he can't use the throttle bodies.

How much bhp do you need to beat the Civics? that will dictate your budget.

Otherwise I would suggest using a different engineif you can, not BMW
2liter Vauxhall etc.

[flyingfarrier]

Hi, yeah we have to run a bmw engine, power wise as much as i can get!!!! i think a couple of guys are knocking on 200 bhp at present but wont be long till someone comes along with a serious vtec,
If anyone can put me in touch with a builder/tuner i would be really grateful

cheers guys

[e21Jason]

Hi

I was thinking 5k for a rebuilding a 2.0 s14 with stand alone a set of cams and a fabricated inlet manifold. It cost me near 5k to rebuild my s14 and the only upgrades where pistons, stand alone and a carbon airbox, I already had a set of uprated cams and dry sump.

Jason

PS buy this plus a gearbox

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=008

and get nigel a carrerea fabricaton to make an inlet manfold and there you go.

There are plenty of engine builders do you have an engine to build I woudl expect the oen inthe thonk to make 2k, one one ebay.de just made 3.5k

Jason

[alloyproducts]

thanks jason for the mention,i have made quite a few inlets now, hardest one was on the e30 m50 tourer thats doing the rounds on here. engine builder wise, try pete whitfield at www.whitfieldraceengines.co.uk he mainly does 700bhp japan stuff but also has alot of got background with other cars.

[flyingfarrier]

managed to get hold of a good s14 engine today, so now after the crank and rods to bring down to 2 ltr anyone know who has some for sale??

Jason thanks tried to ring but no joy. and its a result as i used to live in Bury! will try to get hold of you re the manifold

[UweM3]

managed to get hold of a good s14 engine today, so now after the crank and rods to bring down to 2 ltr anyone know who has some for sale??

Jason thanks tried to ring but no joy. and its a result as i used to live in Bury! will try to get hold of you re the manifold

have a look on www.board.s14power.com
maybe somebody fancies a swap

[flyingfarrier]

bump, still after a crank and rods

[Ant]

bmw spares in ashford kent had a 4 door 320iS lurking, was the bosses sons toy and has not moved in 6 years for defo, £1.5K would secure the complete car, although Geoff from ETA Motorsport was sniffing around it...

[Theo]

Is that STILL there? It had taken a detour into a pond IIRC.