front bolt hole needed to be brought forward and act as mini's crossmember, so 3x3 inch ally was £15 from ebay.
Had to cut notches out to clear rear heater channels. next time would probably go for 5mm ally box for piece of mind.
Rear part of harness bolts in where rear seat belt holder is removed.
Only did it as a stop gap measure, but quite like the look of them.
Also fitted evole chip for m42 engine. Already got +4mm throttle body but haven't really noticed much difference. Probably cos I've got standard bore exhaust, albeit with middle silencer removed. However once the chip was fitted it instantly felt very different, with vastly improved throttle response, so very happy.
sprayed and fitted my is valance too
...obviously very much a go faster part that!
