BMW E30 STRUT BRACE 45GBP!!

[hottuning_eu]

We have new in stock !!!! E30 strut brace!

http://cgi.benl.ebay.be/ws/eBayISAPI.dl ... RK:MESE:IT


Best regards,

Louise

[DCDC]

cant access the page

how much is it any way?

[hottuning_eu]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MESE:IT


This is a new link that will work I think


Best regards,

Louise
Hottuning_eu

[NatDJ]

Try this link, same company.

http://cgi.ebay.co.uk/BMW-E30-all-engin ... dZViewItem

They knock them out at £48.99 including postage from Belgium.

They also do some rather tasty stainless manifolds for a reasonable £250 and some nice suspension set ups.

No assosication with seller, Dr.Evil, Brussels or anything else from Belgium.

[d1mmy]

would these fit with an e30 with a M50 fitted

[clegy1]

i got 1 ov theese from ebay from goingfast it was poor quality and a very poor fit dit was about half an inch out at the tops!!!!!

[hottuning_eu]

That´s from goingfast not ours we haven´t got complains about it???



Best regards,

Louise
Hottuning_eu

[stonesie]

i got 1 ov theese from ebay from goingfast it was poor quality and a very poor fit dit was about half an inch out at the tops!!!!!

Did you jack the car up to fit it? you need to take all the load off the suspension turrets or it will not bolt straight on, they flex under the weight of the car and eaven more when you add load by cornering hard, thats why strut braces came to be in the first place.

[berty]

do the suspension kits have gas shocks or oil?

[clegy1]

yea it was an axle stands as iv jus put new engine in the beast it feels very poor metal aswel like bluddy plasic!!!!!

[stonesie]

Punt it back on the bay, then and try a hottuning one

It's what i would do after reading all the good reviews.

[stonesie]

I would also like to know a bit more about the suspension kits, i'm seriously looking at the origional stuff on the car and thinking it could be better and your price is very tempting

[hottuning_eu]

Our suspension kit is gas on oil.

Last week I sold 2-3 kits at the zone, maybe the buyers can put their experience on the zone after fitting and testing


Best regards,

louise

[scaraveos]

Please guys tell us if you liked the bars. I recently bought a front chinese bar from ebay and it sucks HUGE!!!

[berty]

how much would u do a 60mm suspension kit and a strut brace for a 1990 2dr 318i if i was to buy? and postage to northern ireland as am very interested in buying

[fowler]

been in a car fitted with the suspension kit it is firmm but gives an excellent ride well done hot tunning !!!!

[baptie0]

has anyone bought one of the strut braces? if so are they any good?

cheers

[hottuning_eu]

Hi last group buy it where about 10 pieces, had no complains?


So think or know it a good brace

[gomango]

Just got mine,Good piece of Kit

[hoshy]

I bought the hottunung alloy strut brace and I'm sorry to say I was not impressed with the item. I felt that the grade of aluminum was too soft as the thing could easily be flexed by hand, that is of course quite a subjective point. More serious was how poorly fitting it was, there was NO WAY that it would fit without redrilling to shorten it almost an inch in total. I put this down to my dodgy iS but since I've bought the Sparco M3 brace, this fitted so snuggly that I can only conclude the hottuning brace was at fault.

Having said that. As a company hottuning are delightful to deal with, a friendly and responsive service

Ashley

[hottuning_eu]

HI

should have contacted us, we had no complains at all, maybe you just had faulty one?

[richy187]

I have just ordered on via the bay, put a best offer in and after a little bit of toing and fro -ing got it for £37 delivered!!!!

Will I need to jack the car up to fit it? Or just take some of the weight off the wheels?

TIA

[hottuning_eu]

can't find the order at e-bay? or offer at e-bay?

what's the e-bay name or send me a pm

[richy187]

My ebay name is JaundiceLucas

[hottuning_eu]

ok found it , that's shipped today

You hould have it teusday I think

Have a nice weekend!

[richy187]

Brilliant!!! Thanks for the good feedback!!!

[richy187]

Arrived Tuesday, and fitted very easily, my only concern is the stiffness, where they adjust in the middle is a significant weak spot, and it flexes quite a lot. These would be a lot better if they were made from mild steel. After only about 10 miles of gentle driving the plates are deforming already.

If you are after a strut brace for a track car, then I wouldn't buy one of these, but on the road it would be ok I think.

It is quite a nice addition to the engine bay though

[Emm3]

I bought a Hottuning Strut Brace from a fellow Zoner, the fitting was poor i'm afraid i had to flex the shite out of the brace just to get it to fit, having said that it uber tight so i assume this should only make the shell more stiff.

[Jhonno]

If you were able to flex the brace then it will be doing nothing for the shell rigidity

[A1BMW325iSport]

anyone seen these...

http://cgi.ebay.co.uk/BMW-E30-3-Series- ... 0422844027

[DORAS]

Just ordered one, i'll let you know.

[hottuning_eu]

THIS OFFER STILL STANDS,

NOW FOR 45GBP SHIPPED!!

[DORAS]

mines o.k. painted mine in black wrinkle paint its not so in yer face!