I'm trying to find a new right side wiper arm for a '01 Z3 3.0. On realoem, there only appears to be the left side arm. Is this because they are the same?
http://www.realoem.com/bmw/enUS/showpar ... Id=61_0149
Z3 wiper arms
Moderator: martauto
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
RH arm is 61 61 8 389 550.
It shows on my version of the ETK, but not on the one in your link. I've no idea why!
The fitted quantity of '1' shows that LH and RH are not the same.
It shows on my version of the ETK, but not on the one in your link. I've no idea why!
The fitted quantity of '1' shows that LH and RH are not the same.
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
So you want me to see if my wiper arms have part numbers on?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Interesting! ETK wrong?Awarded wrote:FYI I just picked up part no. '550 but it was the wrong part.
What's the last 7 digits of your VIN, to make sure I'm on the right page of the ETK?
According to this you need 61618389552, 550 is for left hand drive.
http://bmwfans.info/parts-catalog/Z3-Ro ... iper_blade
http://bmwfans.info/parts-catalog/Z3-Ro ... iper_blade
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
61 61 8 389 552.
Morale of the story: Always give your VIN when looking for part numbers.
Morale of the story: Always give your VIN when looking for part numbers.
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
http://stores.ebay.co.uk/Fiat-Lancia-TV ... Car-Spares
This guy has tons of Z3s for braking, he's down south as well, not far from me.
This guy has tons of Z3s for braking, he's down south as well, not far from me.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&

