http://www.munichlegends.co.uk/componen ... ew,detail/
It's just had a boot floor repair using the best method of a reddish reinforcement kit and BMW foam.
E46 M3 track prepped high spec.
Moderator: martauto
-
bss325i
- E30 Zone Team Member
- Posts: 24536
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
-
rix313
- E30 Zone Team Member
- Posts: 4968
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
Adverts like that saying its fully race ready grind my gears. It doesn't even have a roll cage.
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
75 track miles, half a day? 
-
HairyScreech
- Engaged to the E30 Zone
- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
With you on that, its miles off a log book. Your talking 3k at least to get it passed.rix313 wrote:Adverts like that saying its fully race ready grind my gears. It doesn't even have a roll cage.
Is that an open airbox as well?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
bss325i
- E30 Zone Team Member
- Posts: 24536
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
No its not an open air box. Its a Geoff steel racing CSL style air box which contains a BMC panel filter just like a genuine CSL one.
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
To properly repair the boot floor, you have to go inside the boot and cut open the top skin. This is to get access to where the big lump (that the retaining bolt screws into) is welded to the skin below - that's the bit that breaks off first - the cracks in the lower section are the result of this. Unless you re-attach the big threaded bit, it's not a proper job.
That guy who posted on a forum about how he dropped the axle on that 328Ci seemed to do a decent job.
That guy who posted on a forum about how he dropped the axle on that 328Ci seemed to do a decent job.
-
bss325i
- E30 Zone Team Member
- Posts: 24536
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
That's exactly how you carry out the repair using the reddish plates and the turner Motorsport plates.
Winx and I have done two E46's for mates of mine using the turner plates.
Winx and I have done two E46's for mates of mine using the turner plates.