hi, i am a e30 325 owner, need help please im looking at an e36 328 sport on a 96 p plate 100k miles, its advertised as having developed a slight misfire im thinking this may be as simple as a coil pack, has anybody else any ideas? did the nicasil bore ware issue start as a misfire? thats my worry in regard to buying what is a cheap 328. any help be appreciated.
dave
e36 328i sport misfire clears on acceleration help
Moderator: martauto
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
could be anything, but coils can fail it could be duff plug. maybe even a fucked block or head gasket. so many variables, so simply get it on diagnostics if you can and see what flags up if anything
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
- davids8131
- E30 Zone Newbie

- Posts: 24
- Joined: Sat Aug 09, 2008 11:00 pm
thanks mate, its for sale on ebay and im tempted, but worried i buy it and its not just a coil pack, he said it happened suddenly on advert, would i diagnostic tell you if its a coil pack?
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
you need to speak to a guy called dan_the, he's the zones resident m52 expert
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
I would ask what the post compression test numbers look like.
I'd be concerned about a plug that is either oil or fuel fouled at low revs and load.
The plug clears up when the cylinder makes heat and more sparks as the revs go up.
dodgy injector leaking, or bad rings letting compression out and oil in to the bad chamber.
Could be a bad plug or plug lead/coil.
If the compression numbers are good, then you'd have an easier time sorting it, and get the price dropped for the problem.
Low comp in one cylinder means rebuild.
m
I'd be concerned about a plug that is either oil or fuel fouled at low revs and load.
The plug clears up when the cylinder makes heat and more sparks as the revs go up.
dodgy injector leaking, or bad rings letting compression out and oil in to the bad chamber.
Could be a bad plug or plug lead/coil.
If the compression numbers are good, then you'd have an easier time sorting it, and get the price dropped for the problem.
Low comp in one cylinder means rebuild.
m
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
Could be a number of things
Cylinder bore wear
dodgy plug(s)
dodgy coil pack
camshaft sensor
A diagnostic check could reveal more
Nikasil related problems usually cause a rough uneven idle, poor starting and lousy fuel consumption.
Cylinder bore wear
dodgy plug(s)
dodgy coil pack
camshaft sensor
A diagnostic check could reveal more
Nikasil related problems usually cause a rough uneven idle, poor starting and lousy fuel consumption.
-
e30bmlover
- Ac Schnitzer prophet

- Posts: 5352
- Joined: Sun Sep 11, 2005 11:00 pm
- Location: Playing on the ring road!!!
Start with cleaning your mass airflow sensor.. There are a few guides on doing it.. Try the cheap inexpensive way first before you start blowing money on it.
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
what kind of price are you looking at? if its cheep enough then it may be worth a punt and a frag if it is shot.
get a compression tester for cheep and test the thing before buying though, its no more trouble than taking a spark plug out.
get a compression tester for cheep and test the thing before buying though, its no more trouble than taking a spark plug out.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&

