Deep dish alloys for an M3 kitted E30??

Post Tue Mar 22, 2005 1:03 pm

Can anyone help me in finding some nice deep-dish wheels that will fill my arches, width wise, as the car has a M3 kit fitted to it.

I like the idea of BBS style but an open to other ideas.

I am thinking of 7J - 7.5J on the front & 8J + on the rear. 16" i think is a good size

The main thing is that they poke out as far from the rear of the car as possible and do not damage callipers etc.

Any help will be great!!

Cheers

Post Tue Mar 22, 2005 8:03 pm

what stud pattern 4x100? what about alpinas - perfect. or konig divas. or those really nice keskins.

16s are much more difficult than 17s - the choice in 17s in massive.

paul

Post Wed Mar 23, 2005 8:34 am

8J on the rear's wont fill your arch like you want mate. I had an M3 before and i was running 17x8.5J's on the front and 17X10J's on the rear and they filled out rather nicely.

I agree with Placey that the Keskins are quiet nice. You can get a fat one with the gold bolts like i have, but i'm not telling you where to get them from, cause i want mine to be exclusives :lol:

Post Wed Mar 23, 2005 12:25 pm

bootyman wrote:8J on the rear's wont fill your arch like you want mate. I had an M3 before and i was running 17x8.5J's on the front and 17X10J's on the rear and they filled out rather nicely.

I agree with Placey that the Keskins are quiet nice. You can get a fat one with the gold bolts like i have, but i'm not telling you where to get them from, cause i want mine to be exclusives

Cheers!!

I may try and get the info on where to get them at a later date.

Could you help with the ET numbers then. If I go for an 8J what Et would I need etc?