Quick question, the above are 4x100 fitment, anyone heard of or seen these fitted to an e30? Come in 16 inch, ideal? after something different
Cheers
renault GTA 4x100 wheels fit?
Moderator: martauto
-
kingludba
- E30 Zone Regular
- Posts: 336
- Joined: Tue Dec 23, 2008 11:00 pm
- Location: Farnborough, Hampshire
-
leeparkes
- Married to the E30 Zone
- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Do you know what offset they are? and iirc Renault have a smaller center bore so would need to be machined out.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
abhardwaj1990
- E30 Zone Newbie
- Posts: 32
- Joined: Sat Jan 22, 2011 11:00 pm
- Location: Nottingham
Renaults have a larger centre bore of 60.1, so you would require spigot rings.
Offset tends to vary on them from 38-45, so to run on the e30, you would need around 15-20mm spacers for a good fitment.
Offset tends to vary on them from 38-45, so to run on the e30, you would need around 15-20mm spacers for a good fitment.
-
monkey
- E30 Zone Camper
- Posts: 1222
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: devon
wot about scenic 16" steels banded with 16" bmw trims . should look
-
BEMER_LAND
- E30 Zone Newbie
- Posts: 137
- Joined: Wed Dec 02, 2009 11:00 pm
like thesewot about scenic 16" steels banded with 16" bmw trims . should look
cool
if i rember right the old renault wheels are imperal sizes and a pr*ck to get tires for, might be wrong on this model ones though
