2.7 Turbo with Dyno Plot!

[M5pilot]

After hours of mapping by Ant (A-Tech) on the Evolve Dyno here is the Dyno Graph of THE 2.7 Turbo with Holset HX40 Turbo:

Endurance testing is definately a big PASS as it had 26 dyno pulls and during mapping was put under extreme load by the dyno. No issues watso ever.

Here are the final results done in 4th gear:



On the road.......it's a beast!

Mr Gary Swain is one lucky mother******!

Cheers
Sal

[E30BeemerLad]

fekc me that thing must really shovel

nice work guys

[oakey]

Feck me. that is a beast! Is this fowlers car?

[Wilson325i]

wow an e30 with near 400bhp of m20 madness, good god

[fugazi33]

Do you have the spec for that engine?

[brian325i]

holy shit

[Andy325i]

Thats awesome I want to see a video!

Andy

[Gunni]

That looks real real good.

Do you have the boost graph or do you Ant?
Is that the biggest HX40, looks to be coming in pretty late.

[M5pilot]

Video Coming in maybe tommorrow on the dyno and hopefully one on the road - the noise is simply mad!

[Andy325i]

I can believe

Andy

[e30turboed]

thats wicked stage 4 cossie power what boost is it running ?

[kam-325i]

Holy Shit !!!!!!!!!!!

That's one big "Thrown into your seat" Torque curve...........

[SCOTT325SE]

Built By Ant Woodjets, so the figures don't suprise me one little bit! Good Job Ant!!!!!

[E786_GONE]

I jus cant wait for the video. How much would it cost roughly for a decent conversion to be done??? Thanks

[buster]

awesome !!

[1an]

the sound that this car makes is awesome, and some very impressive figures now i wonder what Fowlers is runnning.

[d6dph]

So Ant does know what he is doing, Well who'd of thought it?


Only kidding Mr W, Top work. Lets see some piccies then

[mattG]

Nice work and what mpg does it do under boost

[Laimis]

That looks real real good.

Do you have the boost graph or do you Ant?
Is that the biggest HX40, looks to be coming in pretty late.

Yeah, i'm also interested in sizes. How much cm^2 exhaust housing ?

[gareth]

f**k me!!!! that's pokey!

std 325i power by 4.2k, double that in another 500rpm! that's a massive slap in the kidneys i bet!

[Jhonno]

Feck me i bet that dont half shift!! Need vids, inc road testing, lets see that speedo spin

[Silverfang]

wow an e30 with near 400bhp of m20 madness, good god

Insane My hat comes of to the owner of that BEAST!

[maxfield]

I bet putting that power down is fun! Either way awesome figures!

[tim_s]

Nice work ant!

[Ant]

Cheers guys

This one is a very nice car to drive, power is awesome and the noise is incredible on boost, we'd better not mention fuel consumption though, part throttle is no worse than a stock 325i, on boost- well its pretty juicy but hey, cant have it all...

Spec wise its a TD crank 2.7 lowered comp( 7.4:1), welded and mildly ported head, CatCam turbo grind, log manifold, tial 44mm Ext W/gate and the HX40 is on a 19cm housing

Boost is set to 1 bar on the spring, it will run more boost once the engine has losened up a little more, its done 1.6K miles since the build and is still tight.

Management is MS V3.0 , Wasted spark and 42# injectors.@ 87% duty cycle.

As long as Gary is happy I'm happy



BTW, Fowlers car runs more boost 1.6Bar

[e30_Turbo]

[Gunni]

I´ll bet good money it would come on better with electronic boost control.
but the figures are NICE.

Again, was the boost recorded?

[e30_Turbo]

Going on what I could hear when I spoke to Ant while the car was on the rollers, I think he said 14/15 psi.

I've used both a internal gate and external, with and without boost control and I know for a FACT you get much better response from the turbo with some form of control other than the wastegate's own way.

Even a simple bleed valve made a huge difference, although it was to easy to wind in far too much.......but it was fun while it lasted! LOL

You should get down to Sals RR for a session, it's straight down the M1 for you, about 95 miles away from you. You're even closer than me

[ste]

Nice work Ant.

Why's it redlined at 5,900 BTW? Looks like it would happily keep pulling and pulling.

[Dan318-is]

Nice work Ant.

Why's it redlined at 5,900 BTW? Looks like it would happily keep pulling and pulling.

New engine?

[Colonel Sanders]

that must be awesome!! tose are real good numbers, but surely the log manifold will be staring to choke it abit at that power?
what size downpipe?

[e30_Turbo]

Nice work Ant.

Why's it redlined at 5,900 BTW? Looks like it would happily keep pulling and pulling.

As stated above, the engines only done 1600 miles or so, the plan is to have a few more before really opening it up, as it's all blueprinted anyway I would imagine it'll be good for 7 maybe 8k

Just wish I was there to witness it.

Gary must be a very very happy man

@ Rossle, got the V band mate, cheers!!! Nice bit of kit, will see what it looks like fitted in a week or two

[Colonel Sanders]

Nice work Ant.

Why's it redlined at 5,900 BTW? Looks like it would happily keep pulling and pulling.

As stated above, the engines only done 1600 miles or so, the plan is to have a few more before really opening it up, as it's all blueprinted anyway I would imagine it'll be good for 7 maybe 8k

Just wish I was there to witness it.

Gary must be a very very happy man

@ Rossle, got the V band mate, cheers!!! Nice bit of kit, will see what it looks like fitted in a week or two

no probs mark, hows yours comin along?
my exhaust is nearly there "the guy thats doin it is so fussy so its got to be perfect" then its off to the garage to get the clutch changed, "spec 3, coundnt resist coz it was so cheap"
and ixer from e30tech sent me a full map for 1bar...
what clutch is that running?

[Gunni]

You should get down to Sals RR for a session, it's straight down the M1 for you, about 95 miles away from you. You're even closer than me

You mean me?

Belive me I´m going soon for a baseline run,
then again soon after VEMS.
And I´m sure I´ll be going again and again

[Toby_Unna]

Belive me I´m going soon for a baseline run,

24th?

well done mr. W