my old 325i e30 thats been in the barn for 4 years got it out about a fortnight ago and put it in my workshop on the ramp. started straight up aswell
ive flipped manifold upside down and machined out bolt holes and port holes so ports line up perfectly and made adapter to run t3/t4 turbo with rs turbo wastegate housing and exhaust. modifying rs 500 intercooler. made adapter for afm to intercooler pipe. ive got 22lb 3.5 injectors on the way and im gonna run a 10:1 fmu with 8 psi of boost at 80 psi fuel pressure. by my calculations fueling should be pretty good across the board. modded front end and moved rad toward 3 inches to accomodate intercooler. ive got fittings and pipe for oil feed and ive made the oil return fitting for the sump out of a drilled out 7/8 cat d8 track bolt
actuator is temp mounted gotta make proper brackets now and drill sump for oil return fitting. and thats as far as ive got so far 
