The other week, Me and a couple mates went and looked at an E30 that one of my mates had spotted at this shabby run down dealership, we had a good look round it and the lad who was going to buy it decided against it as it had no MOT and didnt have a failure sheet and that was too much of a risk for him.
After a week of thinking about it i decided to buy it as i was after one anyway and i thought it couldnt really be that bad as i know they rot for england anyway.
So on saturday my friend kindly drove me up to the dealership and i bought it there and then for a whopping £250, plus the day previouse to this a lorry had swung wide and clipped the front wing and bumper so the seller chucked in a new battery and some fuel as he couldnt afford to drop the price anymore due to my haggling.
HISTORY:
The car is on a D plate and was imported from germany in march 2005 by its owner because they moved over here, the lady owner who is 96!!!!!! had owned it from new so i am the first UK owner and only the 2nd owner on the logbook.
Its a 2.0 , 3 door and is left hand drive which made things a bit interesting on the drive home lol (i had trade plates on before the law abiders start moaning).
I took it straight to my work and started stripping it down ready for welding for the mot. this led to;
Both inner rear arches being chopped out and replaced
N/S outer arch being chopped and replaced
Lower rear panel (from the bumper brackets down) being chopped and replaced
O/S Inner wheel arch where the fuel pipes run through chopped and replaced
O/S and N/S front footwells being chopped and replaced.
N/S door shut being chopped and replaced.
And to be honest i didnt think it was that bad considering its age and general condition.
The paintwork is ruined but thats not an issue as i have got 5 litres of VW violet variant 2 laying around from a failed project.
Other things i have also done so far are;
Debadge the boot, for this i used the spot welder and slide hammer to pull out the small recess that the badge leaves then i skimmed over it with filler.
Deleted the ariel from the rear wing and welded it over and filled it.
Started to relocate the filler fuel cap to the O/S door shut and weld up the original filler flap etc.
So here are a fews piccies to keep you happy ;)





nothing amazing but its keeping me busy to say the least, more to come tomorrow
comment away and let me know how wrong im doing it....




