Gheko's 318i rust repairs. updated
Moderator: martauto
-
Mayze
- E30 Zone Regular

- Posts: 647
- Joined: Mon Sep 10, 2007 11:00 pm
- Location: Wirral
Looking good how did he tackle the bit around the fuel breather pipes.

-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
He's still working on that bit.
||

With the wheel arch trim removed and the car up on ramps a lot more of the pipe is visable and looks a lot easier to reach from that angle. I've gone over it with him again this morning, and he was goin to work on it today. He's not quite finished yet as he got called out this afternoon. He's just doing it around other jobs.
The above pics show the inroads made already.
||


With the wheel arch trim removed and the car up on ramps a lot more of the pipe is visable and looks a lot easier to reach from that angle. I've gone over it with him again this morning, and he was goin to work on it today. He's not quite finished yet as he got called out this afternoon. He's just doing it around other jobs.
The above pics show the inroads made already.
-
Mayze
- E30 Zone Regular

- Posts: 647
- Joined: Mon Sep 10, 2007 11:00 pm
- Location: Wirral
Cheers Ive got to do a similar job hence the question cheers for the pics.

-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
We'll see how he gets on. I'll get some pics up of the finished repairs. Hell of a good bloke, and not too far from you if you want him to do it?Mayze wrote:Cheers Ive got to do a similar job hence the question cheers for the pics.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Looking good, make sure you get all that surface rust off with a wire drill brush before you start painting/sealing.
Best using etch primer onto the bare metal first
Best using etch primer onto the bare metal first
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
Cheers Dan! Will do.
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
You gotta love this welder. I had the engine already to pull out, so he's just dropped it off for me! Car is still down at his yard been told it's all done. I'm going down there tomorrow to have a look and part with some readies. Going to waxoil the whole of the underneath on Monday. I'll update with pics tomorrow.
There was some work that needed doing on one of the rear arches. It will need a touch of filler and obviously a re-spray.
Talk about a blank canvas!
There was some work that needed doing on one of the rear arches. It will need a touch of filler and obviously a re-spray.
Talk about a blank canvas!
-
mattrs
- E30 Zone Squatter

- Posts: 1810
- Joined: Fri Apr 18, 2008 11:00 pm
Are you gonna stick with the same colour?
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
For sure mate. Dolphin grey is one of my favourites!mattrs wrote:Are you gonna stick with the same colour?
-
Daf318is
- E30 Zone Camper

- Posts: 1260
- Joined: Mon Jul 30, 2007 11:00 pm
- Location: North Wales (Denbighshire)
Looking good
Where is this guy Rob? Is he a fabricator or a bodywork person or what
Is he local as he may get some buisness out of me in....... 

Now driving an E46 320D touring
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
Daf, the guy is a legend! He's based in Llandyrnog. He's as deaf as a post but has worked as a welder since leaving school. He knows every type of welding, does loads of work on big plant etc. Cars is just his moonlighting thing. Can't recommend him enough.
- Not stupid prices either. Give me a shout if u need something doing and I'll introduce you.
-
Mayze
- E30 Zone Regular

- Posts: 647
- Joined: Mon Sep 10, 2007 11:00 pm
- Location: Wirral
I may give him a go. |Coinsidently my dad used to teach welding at wirral met college but he is now at the age were I help with his Diy. He would prob give me lessons but in his own words is "to old to be titting around crawling under cars" and won't do it for me. Ill see how I get on with the first bit.E30Gheko wrote:We'll see how he gets on. I'll get some pics up of the finished repairs. Hell of a good bloke, and not too far from you if you want him to do it?Mayze wrote:Cheers Ive got to do a similar job hence the question cheers for the pics.

-
SLIMADI
- E30 Zone Camper

- Posts: 1186
- Joined: Sun Aug 10, 2008 11:00 pm
- Location: South-East-Essex
Blimey thats looking really good fella,top welder you found there, its nice when you find someone good at their trade and dont charge the fecking earth. 
www.facebook.com/ Live,Breathe,Build,Believe,BMW
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
Just been down, car was in the air with a load of welding gear underneath it so no chance of pics today. I'll get some on Monday.
Spotted another small hole so he's gonna patch that aswell.
Right, so I'm on the hunt for a bigger engine now that the M40 is out.
Spotted another small hole so he's gonna patch that aswell.
Right, so I'm on the hunt for a bigger engine now that the M40 is out.
