B7's C2.7 Build - FINITO!!!!!!

Show off your pride and joy here

Moderator: martauto

B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Mar 30, 2009 7:20 pm

ricey46 wrote:Well Trev any updates?? :D

I'm still awiting rings shells and loads of other goodies from the stealers, can't wait to get stuck in :cool:
Cranks in and spinning freely. Tonight the oil pump drive and oil pump will go in along with the pistons with new shells. Also the rear crank oil seal can go back on. from there I'm waiting to get my other engine back as I want the front oil seal carrier from that engine as the one for this has a slight crack where someones tried to leave the crank pulley off. Also all the cambelt gear (tensioner etc) was new on that engine so I need that before the head goes back on. Just need to arrange with mr 13 to come over with the hoist to whip it out.

Things just keep gettin in the way at the moment with work and now I have the MX up for sale I have people wanting to view that. Except it looks like a shed at the moment so I need to valet that before the weekend :cry:

More photos later.
B7's Motto. "If it's French, BURN IT!!!!!!"
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Mar 31, 2009 12:03 am

As promised heres where it's at

Basically the bottom ends fully assembled.

Image

Image

Image

Image

Image


Image


Image


Image


Image
B7's Motto. "If it's French, BURN IT!!!!!!"
tomson
E30 Zone Addict
E30 Zone Addict
Posts: 3598
Joined: Sun Nov 06, 2005 11:00 pm
Location: Bristol

Post Tue Mar 31, 2009 12:36 am

B7 wrote:from there I'm waiting to get my other engine back as I want the front oil seal carrier from that engine as the one for this has a slight crack where someones tried to leave the crank pulley off.
I have a few of these spare Trevor, yours for postage costs if it helps speed thing up mate :D Great thread btw
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue Mar 31, 2009 12:56 am

:cool: :cool: :cool:
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
ricey46
E30 Zone Regular
E30 Zone Regular
Posts: 982
Joined: Fri Dec 02, 2005 11:00 pm
Location: Edinburgh

Post Tue Mar 31, 2009 10:14 am

Looking good, what did you use to clean up your engine parts?? Petrol??
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

Image
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Mar 31, 2009 4:01 pm

ricey46 wrote:Looking good, what did you use to clean up your engine parts?? Petrol??
They get soaked in engine degreaser. they a scouring pad is used to remove the oil staining. Then once washed off and dried they get thinners off and blown dry with an air line to ensure theres no fluff, dirt or grit ingreess. They then get fitted immediately to stop any further contamination.
B7's Motto. "If it's French, BURN IT!!!!!!"
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Tue Mar 31, 2009 9:00 pm

Good to see the crank seal is the right way round first time too, well done Trev

I'm taxed up with crane waiting by the phone
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Mon Apr 13, 2009 10:15 pm

the engine must be built and on the stand waiting to go!
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Apr 13, 2009 10:19 pm

no further movement I'm afraid :o: :o: Had a 530 to play with. You up for pulling the engine out this week???? I could get over to Epsom early one evening and hit it?
B7's Motto. "If it's French, BURN IT!!!!!!"
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Mon Apr 13, 2009 10:33 pm

no problem 2 tourings with rent in the window now! I'm working in Ashtead 2moro!
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Apr 13, 2009 10:44 pm

ringing you now.
B7's Motto. "If it's French, BURN IT!!!!!!"
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Wed Apr 15, 2009 8:09 am

Well a MASSIVE thanks to Mr.13 for his help last night. He came straight from work to Epsom where the car is stored and we tore the old 2.5 out. We then stuffed it all in the C2 and he kindly drove it back to my house where it now sits in my garage awaiting the raping of parts.

This now allows me to complete the C2 engine. Sadly we were so rushed I failed to take any photos :o: but I'll get some of the now hopefully rapid progress soon.

Thanks Si. :cheers: :beer:
B7's Motto. "If it's French, BURN IT!!!!!!"
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Sat Apr 25, 2009 1:20 pm

Got up early this morning and got a bit more done. With work and family I'm just grabbing an hour here or there.

Finished building the head, refitting all the rocker gear (went back superbly) and fitted the head to the block and timed her up with a new belt. It spins over a goodun. I decided that as I'm running a standard 2.5 head on the C2.7 bottom end, I'd use a +3 thou head gasket. Reason is if you look at Simon and I's comparison shots, Alpina took the head out of the combustion chambers and put a shallower dish on the piston. With the 2.5 head and the Alpina pistons it was thought I may have raised the compression ratio a bit to high negating the use of super unleaded. Not sure how this is all gonna pan out but it's got only one chance to work!!!

Heres some oily shots of the progress.

Image
Image
Image
Image
Image
Image
Image
Image
Image

Plan of action tomorrow is to detail the eengine bay on the car ready for dropping the lump in.
B7's Motto. "If it's French, BURN IT!!!!!!"
E30Gheko
E30 Zone Addict
E30 Zone Addict
Posts: 3789
Joined: Sun Sep 28, 2008 11:00 pm
Location: Wirral

Post Sat Apr 25, 2009 2:10 pm

:drool: :drool: That's looking well sweet! Lovin the thread. :wink:
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Sun Apr 26, 2009 4:50 pm

Today was spent on the engine bay. it wasn't too bad to be honest but I've gone through it anyway so that when the engine goes back in, it'll just be right........if you know what I mean

Before shots

Image
Image
Image
Image
Image


and after shots

Image
Image
Image
Image
Image
Image
Image


Just the valve clearances to set and shes ready to go in!!!!
B7's Motto. "If it's French, BURN IT!!!!!!"
The_Diddler
Love it up the more door !
Posts: 3619
Joined: Tue May 27, 2008 11:00 pm
Location: Tamworth, Staffs Lovely!!!!!!

Post Sun Apr 26, 2009 5:07 pm

Nice bit of deatiling in the engine bay there Trevor :D :D

Looking forward to the next installment...................

OT a bit but i fitted the lovely rocker cover and manifold i got of you to my 325, they look the doggies, lots of good comments recieved about them, wish i could say i did them thou, full credit of course goes to you, i get the benefit of the shinyness.

I did give the engine bay a damn good clean as well first, before fitting them.

Bet this engine will pull well...............................
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sun Apr 26, 2009 5:12 pm

Very smart Trev.,you still sticking with the auto 'box? Shame about the rust on that crank nose bolt.. winkeye
Youth is wasted on the young.
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Sun Apr 26, 2009 5:54 pm

what was the means of doing this? TFR and a pressure washer or was it more involved?

Looks very smart, I can't believe the condition of your front panel/ valance
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Sun Apr 26, 2009 6:27 pm

tis a very solid car this one. it's very original in the whole.

tfr'd it first then a waxing down with auto glym. the front panel needed some degreaser first. no pressure washer handy so all done by hand :cry:
B7's Motto. "If it's French, BURN IT!!!!!!"
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Sun Apr 26, 2009 6:29 pm

Minty mint! Really looking forward to seeing the finished product. I've never been in an e30 cabrio, this nice weather is making me want to see what they're like.
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Sun Apr 26, 2009 6:30 pm

It isn't like the M20 is a high compression lump to begin with.. Did you work out the change in cylinder volume with the alpina pistons? I suspect it would have been fine, and brought it to a nice efficient compression ratio..

Looking good though dude! Bet you are getting excited to drive it now with the sunshine and all! (Before it all goes..)
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Sun Apr 26, 2009 8:39 pm

Thats looking wicked Trevor, top jop sir :)
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Apr 26, 2009 8:56 pm

needed that didn't it trev twas pretty minging when we pulled the old donk out 8O

I thought it would be ok also, as my alpina 2dr was running this spec when i bought it. But i only ran it on super for the time it was driving. I expect it would of run fine on normal unleaded though.

I run the touring alpina on 95 and its fine
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sun Apr 26, 2009 10:17 pm

Top work squire!
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
ricey46
E30 Zone Regular
E30 Zone Regular
Posts: 982
Joined: Fri Dec 02, 2005 11:00 pm
Location: Edinburgh

Post Mon Apr 27, 2009 3:39 pm

Looking good!
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

Image
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Thu Apr 30, 2009 7:40 am

Well the block is finally done. I have to built up the injector rail and inlet, bolt that on as a last point then the plan of action is, Saturday, me and Si drop it in. :D :D :D

Heres some final shots of it on the stand. I think it looks okay, lets hope it runs okay!!

Image
Image
Image
Image

and finally mocked up with the (albeit dusty :o: ) inlet

Image
Image
Image
B7's Motto. "If it's French, BURN IT!!!!!!"
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Apr 30, 2009 8:24 am

:cool: :cool: :cool: :cool:
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
ricey46
E30 Zone Regular
E30 Zone Regular
Posts: 982
Joined: Fri Dec 02, 2005 11:00 pm
Location: Edinburgh

Post Thu Apr 30, 2009 6:06 pm

:cool:
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

Image
Jesus325iTouring
Frog freak !
Frog freak !
Posts: 11356
Joined: Sun Jan 09, 2005 11:00 pm
Location: Omnipresent!

Post Thu Apr 30, 2009 6:28 pm

Well done Trev,full respect is due,give yourself a pat on the back :D

I've got a C1E engine that could with a rebuild when you've got time. :wink:
Image

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
E30Gheko
E30 Zone Addict
E30 Zone Addict
Posts: 3789
Joined: Sun Sep 28, 2008 11:00 pm
Location: Wirral

Post Thu Apr 30, 2009 6:28 pm

:cool: :cool: :cool: :drool:
madaboutthe30
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Sun Oct 21, 2007 11:00 pm
Location: Stanmore, Harrow

Post Thu Apr 30, 2009 6:33 pm

Nice one Trev, your a true inspiration :)
Dreaming of the day I purchase an E30 M3

--- e30 motorsport cab-- in the process of becoming a trailer queen
--- Z4M Coupe - daily driver
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Thu Apr 30, 2009 7:17 pm

Thanks guys. Tonight it's to be loaded into the back of a Zafira (mates, not mine :eek: ) and taken over to meet it's new home. Si's coming over on Saturday with the hoist and in she goes!!!

Can't wait :cool:
B7's Motto. "If it's French, BURN IT!!!!!!"
User avatar
GC318
E30 Zone Regular
E30 Zone Regular
Posts: 767
Joined: Sun May 25, 2008 11:00 pm

Post Thu Apr 30, 2009 7:47 pm

B7 wrote:Thanks guys. Tonight it's to be loaded into the back of a Zafira (mates, not mine :eek: ) and taken over to meet it's new home. Si's coming over on Saturday with the hoist and in she goes!!!

Can't wait :cool:
Looking V good Trev, will be great to see and hear it in the car. drove past yours on the way home from work - the 530 looks pretty sweet as well.
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Thu Apr 30, 2009 7:49 pm

:cool:
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Blitz
Married to the E30 Zone
Married to the E30 Zone
Posts: 11151
Joined: Mon Jan 30, 2006 11:00 pm
Location: East London+Basildon

Post Thu Apr 30, 2009 8:30 pm

Looks great. What could be better an original mint cabby with a 2.7 M20. :cool: