Is there an easy way of getting the actul bushing away from the bolt that comes down through the floor????
mine seems to be solid as if it is welded, the axel moves down ok but leaves the bushing behind..
im afraid of damaging the bolt by beating it off.
have any of you lot came up with an easy way of getting it off??????????
any info much appreciated
REAR AXEL BUSHINGS!!!!!!
Moderator: martauto
-
COLLIE325
- E30 Zone Newbie

- Posts: 34
- Joined: Sat Nov 04, 2006 11:00 pm
- Location: CO.MONAGHAN, IRELAND
-
ajm-e30
- E30 Zone Regular

- Posts: 472
- Joined: Sat Nov 11, 2006 11:00 pm
- Location: newport,land of sheep sh***ers
tis a f*cking nightmare mate, its quiker and easier to go to a bmw specialist to get them done tbh

-
COLLIE325
- E30 Zone Newbie

- Posts: 34
- Joined: Sat Nov 04, 2006 11:00 pm
- Location: CO.MONAGHAN, IRELAND
was thinking as much
.. cheers
-
hass
- E30 Zone Regular

- Posts: 421
- Joined: Sat Jul 16, 2005 11:00 pm
- Location: north london
ive done hundreds mate...
get your self a copper hammer and bash the bolt up,(remove your back seat first)
once the bolt un seizes bash it straight up so it comes out at the top out the way.
get your self a copper hammer and bash the bolt up,(remove your back seat first)
once the bolt un seizes bash it straight up so it comes out at the top out the way.
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
bet u have done them on ramps rather than on axel standshass wrote:ive done hundreds mate...
get your self a copper hammer and bash the bolt up,(remove your back seat first)
once the bolt un seizes bash it straight up so it comes out at the top out the way.

Considering Selling the Cabby, looks like its gonna go
-
hass
- E30 Zone Regular

- Posts: 421
- Joined: Sat Jul 16, 2005 11:00 pm
- Location: north london
of course cliffy
would do it on the floor FULL STOP!!!!!!!
its amazing how things turn out when you have the garage ficilitys
would do it on the floor FULL STOP!!!!!!!
its amazing how things turn out when you have the garage ficilitys
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
i might do mine using a fork lifthass wrote:of course cliffy![]()
would do it on the floor FULL STOP!!!!!!!
its amazing how things turn out when you have the garage ficilitys

Considering Selling the Cabby, looks like its gonna go
-
hass
- E30 Zone Regular

- Posts: 421
- Joined: Sat Jul 16, 2005 11:00 pm
- Location: north london
LOL!!!!
definatlys need to see that
plesae take some pics
it will be
definatlys need to see that
plesae take some pics
it will be
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
I use the fork lift a few years back to put a exhaust system on my type r and also my van, hhmm.hass wrote:LOL!!!!
definatlys need to see that
plesae take some pics
it will be
Ill aks stu if he wants to help me fit them whilst its up on the forks
If i do it ill post pic's

Considering Selling the Cabby, looks like its gonna go
-
hass
- E30 Zone Regular

- Posts: 421
- Joined: Sat Jul 16, 2005 11:00 pm
- Location: north london
love to see that!!!!!!
