Replacing bonnet cable

Need technical Q/A then you're in the right place

Moderator: martauto

tonydavis
E30 Zone Newbie
E30 Zone Newbie
Posts: 18
Joined: Sun Sep 11, 2005 11:00 pm
Location: Dorset Hants border

Post Wed Feb 07, 2007 9:14 am

I'm going to have to replace it quite soon on my M3, if it should break before i get round to it, how easy is it to open the bonnet without it?
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Wed Feb 07, 2007 9:27 am

not too hard, required tools torch and a screw driver.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
jibowski
E30 Zone Newbie
E30 Zone Newbie
Posts: 238
Joined: Thu Dec 28, 2006 11:00 pm
Location: east yorkshire coast

Post Wed Feb 07, 2007 6:30 pm

it can be a bugger, my cable snapped

if i remember correctly I undid the two screws holding the passenger side grille on (you cant get at the top clips if bonnets stuck shut), carefully lifted the grille up and used a socket driver to undo the two bolts holding the catch on, the bonnet should open then when you lever the catch open through the hole in the bulkhead.

Its quite easy after that to lube the mechanism when removed and thread a new cable, it passes into the paasenger side cabin though a hole near the fuse box, you have to take the glove box out to make getting at the lever easy
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Wed Feb 07, 2007 7:08 pm

a hole in the middle of the catch, stick a flat screwdriver in there and turn can be accessed from through the slats in the grill with a long enough screwdriver.
Image