How do you change a diff ?

Need technical Q/A then you're in the right place

Moderator: martauto

Herrity
E30 Zone Regular
E30 Zone Regular
Posts: 501
Joined: Sun Jul 31, 2005 11:00 pm
Location: Liverpool & Leamington spa ! Drives: Mercedes 190 cosworth & 1990 325i touring

Post Fri Dec 08, 2006 12:06 am

As title really, what do you have to do ? Any tips or tricks to give me ? Thanks in advance !
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 08, 2006 12:14 am

Its a simple job just a bit labour intensive. Jack both the rear wheels of tehe ground and support the car on stands You need to undo the four 17mm bolts holding the propshaft to the diff. A second hand to operate the handbrake so you can spin the prop and get to two bolts at a time helps. loosen the 19mm nut/bolt combo going through the guibo but dont remove it. Undo the 12 x 7mm alum key bolts holding the driveshaffts on but use a fookin socket key not a proper alumn as you will just round them. Then, the worst bit is the four 19mm bolts attaching the diff to the subframe; there are two almost directly above the prop which are easy to get to, and two on top of the diff for which you are best to invest in a 19mm ratchet spanner.

Then remove the donut 19mm bolt that you earlier undid, and give the diff a tug to get the flange and the prop seperated. It should really be removed and supported with a trolley jack, having sed that i changed my diff three weeks ago on a sunday on my own without a trolley jack (only had the bmw jack to get it off the floor) and using two 19mm spanners and one 17mm spanner and the 7mm alum key socket/ratchet.

Then just do the reverse to put the new one in! i found putting the flange in place with the prop then threading the donut bolt through made it easier; but do the subframe bolts up first otherwise they can be hard to line up

hth
Herrity
E30 Zone Regular
E30 Zone Regular
Posts: 501
Joined: Sun Jul 31, 2005 11:00 pm
Location: Liverpool & Leamington spa ! Drives: Mercedes 190 cosworth & 1990 325i touring

Post Fri Dec 08, 2006 12:18 am

Thanks mate, have full workshop and air tools to use !
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 08, 2006 12:21 am

Herrity wrote:Thanks mate, have full workshop and air tools to use !
Lucky sod although i dont think even the air tools will be much use on the subframe bolts they are real fuckers! Good luck.
Herrity
E30 Zone Regular
E30 Zone Regular
Posts: 501
Joined: Sun Jul 31, 2005 11:00 pm
Location: Liverpool & Leamington spa ! Drives: Mercedes 190 cosworth & 1990 325i touring

Post Fri Dec 08, 2006 12:27 am

A tin of WD40 should sort them, and we have a truck wheel nut gun, it'll either snap it or make the job easier !
WillG
E30 Zone Regular
E30 Zone Regular
Posts: 433
Joined: Wed Mar 29, 2006 11:00 pm
Location: Cheltenham

Post Fri Dec 08, 2006 12:31 am

i think he means you wont be able to get at bolts with air tools
Herrity
E30 Zone Regular
E30 Zone Regular
Posts: 501
Joined: Sun Jul 31, 2005 11:00 pm
Location: Liverpool & Leamington spa ! Drives: Mercedes 190 cosworth & 1990 325i touring

Post Fri Dec 08, 2006 12:32 am

Oh I see, he means general access to the bolts area ! :cry:
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 08, 2006 12:32 am

WillG wrote:i think he means you wont be able to get at bolts with air tools
comprende hero
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Fri Dec 08, 2006 12:37 am

Dan, you forgot to mention that you also have to disconnect the speed senser loom from the back of the diff - pulls straight out, or you'll end up with a broken loom.

Neil.
Image

"I F**KING LOVE YOU GUMBO"
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Dec 08, 2006 12:54 am

swivel-top ratcheting spanner... hero tool
Image
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 08, 2006 12:21 pm

Nelly wrote:Dan, you forgot to mention that you also have to disconnect the speed senser loom from the back of the diff - pulls straight out, or you'll end up with a broken loom.

Neil.
i went to bed and thought, dam i didnt put that on the thread! :lol:
if your swapping and early diff for a late dif also the speedo plugs may be different types but can be swaped over i think?
Herrity
E30 Zone Regular
E30 Zone Regular
Posts: 501
Joined: Sun Jul 31, 2005 11:00 pm
Location: Liverpool & Leamington spa ! Drives: Mercedes 190 cosworth & 1990 325i touring

Post Fri Dec 08, 2006 12:30 pm

No the diff is from the same year car, it was a car theo was breaking a few months back so hopefully it should go smoothly ! I've soaked the general area in WD already this morning so shall attempt to do it this afternoon but first its MOT time ! :cry:
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 08, 2006 12:31 pm

good luck my friend!
Herrity
E30 Zone Regular
E30 Zone Regular
Posts: 501
Joined: Sun Jul 31, 2005 11:00 pm
Location: Liverpool & Leamington spa ! Drives: Mercedes 190 cosworth & 1990 325i touring

Post Fri Dec 08, 2006 12:33 pm

I need it ! Me headlights need re-aiming and handbrake is poo to start with !