Hi guys
With the diff already removed is it easier to remove the whole rear beam than just the rear arms? I need the rear arms from a car i am scrapping and am just looking for the quickest least hassle way of going about removing them.
Cheers Spadge..
Rear beam removal?
Moderator: martauto
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
-
liam012
- E30 Zone Camper

- Posts: 1424
- Joined: Sun Aug 28, 2005 11:00 pm
as far as i remember easier to undo the the subframe bushes then the two small bolts (usually rusted to hell) which attach the beam to the rear sill. (two small bolts on each sill) should just drop down nice and easy - would prefer that than trying to wiggle away and be a knuckle donor for a few hours at the 4 rusty trailing arm bolts...

-
TW166Y
- E30 Zone Addict

- Posts: 3118
- Joined: Wed Jun 08, 2005 11:00 pm
- Location: Stoke (Clayheads)

Saying goodbye to 4-pot wrongness
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Ok guys cheers for the advice
I'll see what is the course of least resistance later and have my trusty WD at the ready
I'll see what is the course of least resistance later and have my trusty WD at the ready
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
spadge,
Undo the 4 bolts on the sills next to the subframe bolts. Undo the big nut. and then the rest should almost fall out ( barring cables and brake lines etc
Cya tonight
Undo the 4 bolts on the sills next to the subframe bolts. Undo the big nut. and then the rest should almost fall out ( barring cables and brake lines etc
Cya tonight
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Cool you can do it tonight thenoze30 wrote:spadge,
Undo the 4 bolts on the sills next to the subframe bolts. Undo the big nut. and then the rest should almost fall out ( barring cables and brake lines etc
Cya tonight
-
TW166Y
- E30 Zone Addict

- Posts: 3118
- Joined: Wed Jun 08, 2005 11:00 pm
- Location: Stoke (Clayheads)
yeh c-mon ozSPADGE wrote:Cool you can do it tonight thenoze30 wrote:spadge,
Undo the 4 bolts on the sills next to the subframe bolts. Undo the big nut. and then the rest should almost fall out ( barring cables and brake lines etc
Cya tonight

Saying goodbye to 4-pot wrongness
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
i'll give it a bash!
-
TW166Y
- E30 Zone Addict

- Posts: 3118
- Joined: Wed Jun 08, 2005 11:00 pm
- Location: Stoke (Clayheads)
good man 

Saying goodbye to 4-pot wrongness

