Cleaned my throttle body today

Need technical Q/A then you're in the right place

Moderator: martauto

marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Tue Nov 28, 2006 6:55 pm

Hi all. I was a bit bored today so I decided to have a play under the bonnet of the car. I completely removed the throttle body and cleaned up the inside with paint thinners. It looks brand new now, and it runs so much smoother, and the idle is much better. An interesting thing I noticed while I had it off was that there was oil pouring from the casing of the throttle position sensor. I opened it up and the thing was full of oil, so I cleaned that up too. My car has done about 160k so I would think anyone who's car's done over 100k would benefit from doing this, it feels great now, and was good fun. :D
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Tue Nov 28, 2006 7:11 pm

Think there was a tip to drill a very small hole in the bmw emblem on the tps to let the oil out.
Sure someone who knows more will enlarge on this theory soon.
marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Tue Nov 28, 2006 7:27 pm

I did think about that aswell :roll: will do that tomorrow. Thanks man
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Nov 28, 2006 9:49 pm

The improvements are probably down to a now working throttle body switch, rather than the TB cleaning!