Urgent help needed with 325 sport original alarm & immob

[dazaro]

Please help!.

Hi all.

I have a 325i sport , its got the original BMW alarm & immobiliser ,its the type of alarm with the small key to turn the alarm & immobiliser off ,so last week i tried the key in the alarm to test if the original BMW alarm & immobiliser was still working! ,well the red light inside the car come on and next the alarm went off ,so next i turn off the alarm & immobiliser off with the key and now the car will not start!.
Fuel pump not coming on and no spark!..
I have no alarm fob ,just a small key.
Any help will be much appreciated.
Thanks.

[Brianmoooore]

Take off the cover above the glovebox. Find two pin white connector with two green wires on one side at least. Unplug alarm wires from this connector and hunt for a matching connector fitted with a short loop of green wire taped to the loom nearby. If it's there, pull it free and plug it into the now empty socket.
If it's not, cut the alarm wires a couple of inches from the plug, solder them together and insulate, preferably with heat shrink tubing.

[dazaro]

Hi Many thanks for your help.
I had a look above the glovebox ,many wires! ,what size is the BMW alarm box! there is two
boxes one 3" and one about 6" ,i can not seem to find the two pin white connector with two green wires
I,m going back to have good look.

Regards Daz

[Brianmoooore]

Look at the main car loom across the top, not the alarm box looms.