Question.. ???

Need technical Q/A then you're in the right place

Moderator: martauto

zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Wed May 17, 2006 8:24 am

What is the standered fuel pressure on 2.5 m20 at the injector rail.??
M30 Tech 1 Touring on gas.
Image
Top
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Wed May 17, 2006 8:28 am

3 bar (above manifold pressure assuming the vacuum signal line's connected)

Should be stamped on the FPR too :)

Whyeeeeee?
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
Top
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Wed May 17, 2006 10:09 am

just changed airfolw meter and cleaned inside the TB.
when i put it all back it was out so i have set it all up again but can't rember the oe pressure and i should be running 0.4 above standered.
M30 Tech 1 Touring on gas.
Image
Top

Return to “E30 Technical Help”