Can't get my shocks off??

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
speedfreak
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Sun Apr 16, 2006 11:00 pm

Post Tue May 09, 2006 10:03 pm

My front shocks of a 325 cabrio are stuck!

I took all bolts & nuts off the wishbone but it still won't come off its place to allow the shock more movement!!!!

The steering rack bit has sthe nut half way off but can't go any further as the place for the allen key is rusted and worn (so i can't hold the bolt in place!)

Any ideas, suggestions would be very much appreciated!!

By the way I'm doing it from home so no compressors!!

Thanks
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Tue May 09, 2006 10:15 pm

you need to remove the track rod end nut (17mm) and the strut mount nut (19mm)

then use a ball joint splitter (scissor type) to lossen both.

then get a long pole and lever the lower wishbone downward while pulling the strut outward. (considerable pressure is needed)

once free, remove the 3 strut top mounts.

easy. lol

hth.
Image
Quaser
E30 Zone Addict
E30 Zone Addict
Posts: 2622
Joined: Sun Jan 09, 2005 11:00 pm
Location: West London

Post Tue May 09, 2006 10:17 pm

try putting a trolly jack under the ball joint part and jacking it up.

This will stop it turning a bit!

Q
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue May 09, 2006 10:18 pm

Put the jack under the track rod end and jack it up. This should put enough pressure on the joint to stop it spinning while you undoe :wink: