how do u do it pls, nobody is replying lol
http://www.e30zone.co.uk/modules.php?na ... ic&t=29281
front fog light bulb change
Moderator: martauto
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
remove the top rubber bung at the front of the light (lower one to adjust height). unscrew the screw. pull out the light assembly (remove it by pulling the side with the screw first toward you and it will half come out as the other side is fixed in a ball socket) pull light out. disconnect the wires from back. open the screw underneath and change the bulb. put it back in reverse.
mrlee
mrlee
-
tonyppe
- E30 Zone Regular

- Posts: 636
- Joined: Tue Feb 07, 2006 11:00 pm
- Location: Carshalton
THANKS MATE!
just been out there again just before reading this
im soaked hehe.
:p
just been out there again just before reading this
im soaked hehe.
:p
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
The easy way to do it is to leave the light in place, unscrew the cover at the back of the light on the bottom undo the clip and pull the old one out.
Make sure you don't touch the glass on the new bulb or it'll burn out.
Cheers,
Iain T
Make sure you don't touch the glass on the new bulb or it'll burn out.
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Difficult to do like this as the mounting frame is in the way of the cover the bulb comes out.Templ8e30 wrote:The easy way to do it is to leave the light in place, unscrew the cover at the back of the light on the bottom undo the clip and pull the old one out
Iain T
Correct way, from the handbook, is as MrLEE says.
