White connector (C1) going into Instrument Cluster seems faulty. When I push wires on the connector, I can see the fuel gauge needle bounce around and the brake pad light flicker on and off. Any ideas how I replace this connector?
I started having this problem when a mechanic replaced the fuel pump and aggressively pulled the wiring harness linked to the white connector. Had problems with the fuel gauge and brake pad light after mechanic messed around with wires. Usual checks done ( checked fuel sending unit, ground nut, resoldered the connections).
Instrument Cluster Connector (C1) Problem)
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49359
- Joined: Mon Jan 10, 2005 11:00 pm
Main circuit board can crack around the pins of the sockets if the wiring to them is pulled around.
You say "resoldered the connections". Including these?
You say "resoldered the connections". Including these?
-
RK1
- E30 Zone Newbie
- Posts: 25
- Joined: Mon Aug 24, 2020 8:37 pm
Haven't done these - will give it a go - thanks your help