This may be a stupid question but I don't know.
Do the coupe doors from a pre-facelift fit on a facelift model?
Mine is a 1989 facelift but I can't find a replacement passenger side door other than a 1987 one which I don't know what it was removed from.
Any help would be appreciated
Coupe doors
Moderator: martauto
-
Speedtouch
- Old Skooler

- Posts: 14100
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Yes, they should fit OK, though there may be minor trim and trim hole differences.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Miltonwadams
- E30 Zone Newbie

- Posts: 4
- Joined: Sat Jul 03, 2010 11:00 pm
- Location: Cornwall
Ahh ideal. Hopefully that'll make it easier to find one.
Thank you for your help
Thank you for your help
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49359
- Joined: Mon Jan 10, 2005 11:00 pm
Window winder mech. may be different, although '87 might well have the later design.
If the door you're considering is complete, check the colour of the glass tint. Standard tint was brown on pre facelift, and green on post, the shape of the glass is different between the early and later mechs, and just to complicate things even further, I've seen a couple of cars with the early mech. and green glass.
Good news is that your existing glass and mech can be fitted to a pre facelift door. I did it once, years ago, but can't remember if all the fixing holes were present, or I had to drill one or two.
If the door you're considering is complete, check the colour of the glass tint. Standard tint was brown on pre facelift, and green on post, the shape of the glass is different between the early and later mechs, and just to complicate things even further, I've seen a couple of cars with the early mech. and green glass.
Good news is that your existing glass and mech can be fitted to a pre facelift door. I did it once, years ago, but can't remember if all the fixing holes were present, or I had to drill one or two.
-
Miltonwadams
- E30 Zone Newbie

- Posts: 4
- Joined: Sat Jul 03, 2010 11:00 pm
- Location: Cornwall
I don't think there's glass in the door that I'm looking at so it sounds like I'm going to have to do as you've explained.
Thank you for your help. I'm glad it'll fit though
Thank you for your help. I'm glad it'll fit though
-
Miltonwadams
- E30 Zone Newbie

- Posts: 4
- Joined: Sat Jul 03, 2010 11:00 pm
- Location: Cornwall
I've managed to get a facelift door thanks to a dude on this forum. Thank you for all your help
