Looking at ordering outer sill panels for mine, but I'm a bit confused when looking at the diagrams at RealOEM.
So am I right thinking that no 4 at this diagram is the COMPLETE outer sill panel for a saloon?
http://www.realoem.com/bmw/enUS/showpar ... Id=41_0254
The reason I'm asking, is because there's another diagram, where the same part no 4 looks slightly different on the image, and it also seems no longer available?
Here > http://www.realoem.com/bmw/enUS/showpar ... Id=41_0249
Thanks for your help
E30 Outer Sill Panels
Moderator: martauto
Got some pictures for you to give you a better idea:

So the top one is described as "complete" by companies who sell these sill panels, but yet the bottom one looks pretty much the same, except it doesn't have the cut outs for the A and B pillar?
The way I understand it, is that you can still buy the no 4 on the diagram from BMW directly, which looks like the second sill panel on the picture above, but I'm not sure why other companies who sell replicas don't describe it as "full"?
Any help appreciated.

So the top one is described as "complete" by companies who sell these sill panels, but yet the bottom one looks pretty much the same, except it doesn't have the cut outs for the A and B pillar?
The way I understand it, is that you can still buy the no 4 on the diagram from BMW directly, which looks like the second sill panel on the picture above, but I'm not sure why other companies who sell replicas don't describe it as "full"?
Any help appreciated.
-
- E30 Zone Team Member
- Posts: 18168
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Unless your sills are REALLY rotten and have been bodged before, you are much better off just doing 'local repairs. Replacing a complete outer sill is very involved and will create a load of other potential rust issues down the line. Obviously rust / gape pics will help us advise better 
