Would m50 injectors fit m20?
Cheers
injectors
Moderator: martauto
-
gnrsoul
- E30 Zone Regular
- Posts: 612
- Joined: Mon Oct 05, 2009 11:00 pm
- Location: Kincardine Scotland
-
motormanmick
- E30 Zone Regular
- Posts: 259
- Joined: Sun Nov 02, 2014 11:00 pm
- Location: Coffs Hbr, Aust
Yes, you would need to check that the impedance is the same, you are obviously looking at an up grade, so probably the best way to go would be disc type 4 hole for a better spray pattern and go for roughly the same delivery rate.
I used this website to match my m50 2.8, by looking up 1st what is used in m52 2.8 and then cross referencing with disc type 4 hole, same ecu connection, type EV1 and high impedance and slightly better delivery rate and found a ford injector, which looks a bit different but fits like a glove. Just look up the bosch section and start checking the specs, cheers.
http://users.erols.com/srweiss/tableifc.htm
I used this website to match my m50 2.8, by looking up 1st what is used in m52 2.8 and then cross referencing with disc type 4 hole, same ecu connection, type EV1 and high impedance and slightly better delivery rate and found a ford injector, which looks a bit different but fits like a glove. Just look up the bosch section and start checking the specs, cheers.
http://users.erols.com/srweiss/tableifc.htm