Will JRD 4x100 ET 38 fit

Post Sun Mar 09, 2014 11:06 am

Hi

Have found these in Bangalore, about 850km away from Mumbai.
So wanted advice if these fit my saloon.

JRD
4x100
6.5j
ET38

Thanks

Post Sun Mar 09, 2014 11:47 am

You'll need spacers to make them fill out the arches.

Post Sun Mar 09, 2014 11:50 am

How much mm?
And is that advisable/a done regular thing?
I won't be speeding any where but still would want it to handle well.

Post Sun Mar 09, 2014 11:51 am

The bottle tops are 14", 4x100,
6.5j and ET35

These are 15" and ET 38.
How much will ET38 matter?

Post Sun Mar 09, 2014 11:55 am

I would use a 5mm spacer

Post Sun Mar 09, 2014 12:00 pm

Great so I'm going ahead with the deal
Thanks Ravi

Post Sun Mar 09, 2014 12:11 pm

Have you confirmed the central bore is 57.1mm?

Post Sun Mar 09, 2014 12:47 pm

The seller has no clue about anything. Even the PCD which he will confirm with a tyre dealer tomorrow.
Taken off an old Honda. Which I believe shares the same size as ours.

But I surely will.

Anything else to look for?

Post Sun Mar 09, 2014 12:48 pm

I have been googling these wheels by JRD but nothing online.