hiya all hws u guys doin well im new to beemas i bought a 320i touring e30 for 200 quids gave it to my mate for a day and he hit a kerb and seized the engine so i got hold of another engine from my mechanic he told me that h would put in a c2.7 alpina lump plus he owns bmparts the engine had allready been converted to another touring so hes putting it in mine for 800 all inn as a mates rate the engine has been modified inc gas flowed head shrick cam chip and othere stuff he said the previous owner had a printout stating it was doin 211.7bhp
i use to be a vdub guy so dnt know much more on this specific engine
jus wann know if ths bhp is possible out of the 2.7alpina lump has anybody got one whats the 0-60/top speed anything i can do to make it quicker
mainly whats the petrol like
all info would be gratefull thanks for your help in advance
C2.7 ALPINA INFO NEEDED PLZ
Moderator: martauto
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Yes that sort of power is attainable from a 2.7.
Depending on gearing 0-60 is between 6-6.5 secs.
is it an Alpina or a 2.7 Alpina copy? Sounds like an Alpina copy engine (no bad thing if its done properly).
Where was the dyno print out done?
Depending on gearing 0-60 is between 6-6.5 secs.
is it an Alpina or a 2.7 Alpina copy? Sounds like an Alpina copy engine (no bad thing if its done properly).
Where was the dyno print out done?
-
touring_thru
- E30 Zone Newbie

- Posts: 58
- Joined: Tue Oct 04, 2005 11:00 pm
- Location: WEST LONDON
na it is an original as hes got the log book and chasis number of the engine also all the mots direct bmw and its only done 89k mechanic told me its stamped alpina and chasis number on the rocker cover/ manifold he was saying
the printout was done at power and engineering
M5PILOT what is a copy alpina what is it orignally and how can you tell as me mate mite have a copy and hes thinking of buying it
the printout was done at power and engineering
M5PILOT what is a copy alpina what is it orignally and how can you tell as me mate mite have a copy and hes thinking of buying it
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Is not hard to tell if its a genuine lump.
1) Black Rocker Cover - should have tiny initials engraved on it
2) Black Inlet manifold
3) C 27 engraved at bottom of block on a tab on the passneger side.
4) 4/5 digit number engraved on side of head. Look opposite first injector from front.
5) Throttle Body may have same initials as rocker cover.
Power Engineering are a decent setup.
800 notes is cheap if its got all of the above.
Alpina Copy engine -
this could be any 2.7. Some are crap some are great.
1) Black Rocker Cover - should have tiny initials engraved on it
2) Black Inlet manifold
3) C 27 engraved at bottom of block on a tab on the passneger side.
4) 4/5 digit number engraved on side of head. Look opposite first injector from front.
5) Throttle Body may have same initials as rocker cover.
Power Engineering are a decent setup.
800 notes is cheap if its got all of the above.
Alpina Copy engine -
this could be any 2.7. Some are crap some are great.
-
touring_thru
- E30 Zone Newbie

- Posts: 58
- Joined: Tue Oct 04, 2005 11:00 pm
- Location: WEST LONDON
hey thanks well im a lucky one as its got all the above the reason y i werent sure it was original is cos of the black head and manifold etc but know you tellin me thats makes it original
phewwwwwwwwwwwwww
hey m5pilot my mates one is defo a copy however his is in a car thats running and it bhp is 200.4bhp done by dyno i think
how can we tell weather its a crap or a grat copy
phewwwwwwwwwwwwww
hey m5pilot my mates one is defo a copy however his is in a car thats running and it bhp is 200.4bhp done by dyno i think
how can we tell weather its a crap or a grat copy
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Well it produces 204 bhp - got to be good!
So are you buying this Alpina lump or what?
So are you buying this Alpina lump or what?
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
im confused.. in another post your having an m50 put in 
Twin engined maybe?!
Twin engined maybe?!
-
touring_thru
- E30 Zone Newbie

- Posts: 58
- Joined: Tue Oct 04, 2005 11:00 pm
- Location: WEST LONDON
yea thats rite jhonno but the alpina engine came in for a little cheaper surprising
and i got my car back today and its feckin quick we toped out at 144 coz of traffic
and i beat an e36 325i
ill post pics of my touring soon can anybody tell me how to do that
and i got my car back today and its feckin quick we toped out at 144 coz of traffic
and i beat an e36 325i
ill post pics of my touring soon can anybody tell me how to do that
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
So youve got the 2.7 now. Time to go to a dyno and show us what it puts down.


