E36 Steering Rack Track Locking Discs.............
Moderator: martauto
-
Kedge
- Old Skooler
- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I'm swapping the track rods on an E36 rack to E30 rods. My question is do i need to use E30 or E30 locking discs as the part number is different although i can't really see there being much of a difference between them.
-
HairyScreech
- Engaged to the E30 Zone
- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
use the ones that are the correct size for the rack ends you have.
in this case the answer should be to reuse the locking discs you have on atm or source some the correct size for your current e30 track rods.
there is a couple of different sizes depending on who made them so its best to check what you have.
in this case the answer should be to reuse the locking discs you have on atm or source some the correct size for your current e30 track rods.
there is a couple of different sizes depending on who made them so its best to check what you have.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Kedge
- Old Skooler
- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
From that i take it you mean i should stick with using the E36 ones since it's an E36 rack with E30 ends? 