mirrors

Need technical Q/A then you're in the right place

Moderator: martauto

oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Wed Nov 02, 2005 8:54 pm

Right!

i just worked out why my head was hurting when I drove the car! The mirrors are the wrong way round! Is it possible to swap them over? I don't like having the wide angle on the rhs.
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Wed Nov 02, 2005 9:03 pm

But the wide angle mirror is supposed to be on the drivers mirror, it's to help eliminate the blind spot.
Image
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Thu Nov 03, 2005 10:02 am

odd.. back in oz we have the normal mirror on the drivers side, and the funky onbe on the pax!

Anyways, are they interchangable?
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Thu Nov 03, 2005 10:04 am

oze30 wrote:odd.. back in oz we have the normal mirror on the drivers side, and the funky onbe on the pax!

Anyways, are they interchangable?
The glass is yes.
Image
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Thu Nov 03, 2005 1:45 pm

How hard is it to swap over? do you just pry it off like e36? ( or maybe I shouldn't have done it that way.. but that's how it worked on my mums car! 8O )
Simon
E30 Zone Team Member
E30 Zone Team Member
Posts: 14939
Joined: Sun Jan 09, 2005 11:00 pm
Location: South Wales

Post Thu Nov 03, 2005 1:58 pm

oze30 wrote:How hard is it to swap over? do you just pry it off like e36? ( or maybe I shouldn't have done it that way.. but that's how it worked on my mums car! 8O )
There's a small hole on the underside of the mirror, put the end of a small flatblade screwdriver through there, and you have to rotate a small plastic ring which holds the mirror glass to the holder, if you look into the mirror, just under the bottom of the mirror, you should just be able to see the teeth on the plastic ring.
Image
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Nov 04, 2005 8:59 am

Cheers. Will look at this tonight!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Nov 04, 2005 9:14 am

Simon wrote: if you look into the mirror, just under the bottom of the mirror, you should just be able to see the teeth on the plastic ring.
Adjust the mirror to fully up first. I always put the small screwdriver in from here, as you can see what you're doing. Carefull not to damage the paint at the bottom of the mirror housing though.